PS21997-4_11 Datasheet, PDF (7/11 Pages) Mitsubishi Electric Semiconductor – Dual-In-Line Package Intelligent Power Module

MITSUBISHI SEMICONDUCTOR <Dual-In-Line Package Intelligent Power Module>
PS21997-4/-4A/-4C/-4W
TRANSFER-MOLD TYPE
INSULATED TYPE
RECOMMENDED OPERATION CONDITIONS
Symbol
Parameter
Condition
Limits
Unit
Min. Typ. Max.
VCC
Supply voltage
Applied between P-N
0
300
400
V
VD
Control supply voltage
Applied between VP1-VNC, VN1-VNC
13.5 15.0 16.5
V
VDB
Control supply voltage
∆VD, ∆VDB Control supply variation
tdead
Arm shoot-through blocking time
fPWM
PWM input frequency
IO
Allowable rms current
Applied between VUFB-U, VVFB-V, VWFB-W
For each input signal, TC ≤ 100°C
TC ≤ 100°C, Tj ≤ 125°C
VCC = 300V, VD = VDB = 15V,
P.F = 0.8, sinusoidal PWM,
Tj ≤ 125°C, TC ≤ 100°C
fPWM = 5kHz
(Note 8) ^{fPWM = 15kHz}
13.0
–1
2.0
—
—
—
15.0
—
—
—
—
—
18.5
1
—
20
15.0
11.0
V
V/µs
µs
kHz
Arms
PWIN(on)
(Note 9) 0.5
—
—
µs
Allowable minimum input
PWIN(off) pulse width
200V ≤ VCC ≤ 350V,
13.5V ≤ VD ≤ 16.5V,
Below rated
current
1.5
13.0V ≤ VDB ≤ 18.5V,
Between
-20°C ≤ Tc ≤ 100°C,
rated current
and 1.7 times
N-line wiring inductance less than 10nH _{of rated}
3.0
—
—
—
µs
—
(Note 10) current
VNC
VNC variation
Between VNC-N (including surge)
–5.0
—
5.0
V
Note 8 : The allowable rms current value depends on the actual application conditions.
9 : Input signal with on pulse width less than PWIN(on) might make no response.
10 : Input signal with off pulse width less than PWIN(off) might make no response, or make delayed response to P-side input only.
(The delay is less than about 4µs.)
Please refer Fig.7 about delayed response and Fig.11 about N-line inductance.
Fig. 7 About Delayed Response Against Shorter Input Off Signal Than PWIN(off) (P-side only)
P-side control input
Internal IGBT gate
Output current Ic
t2
t1
Real line···off pulse widthϾPWIN(off); turn on time t1
Broken line···off pulse widthϽPWIN(off); turn on time t2
Sep. 2008
7