MH1S72CPG-10 Datasheet, PDF (30/47 Pages) Mitsubishi Electric Semiconductor – 75497472-BIT (1048576-WORD BY 72-BIT)SynchronousDRAM

Preliminary Spec.
Some contents are subject to change without notice.
MITSUBISHI LSIs
MH1S72CPG-10,-12,-15
75497472-BIT (1048576-WORD BY 72-BIT)SynchronousDRAM
AVERAGE SUPPLY CURRENT from Vdd
(Ta=0 ~70°C, Vdd = 3.3 ± 0.3V, Vss = 0V, unless otherwise noted)
Symbol
Parameter
Test Condition
Limits(max)
Unit
-10 -12 -15
Icc1s operating current, single bank tRC=min.tCLK=min, BL=1, CL=3
500 450 375 ^mA
Icc1d operating current, dual bank tRC=min.tCLK=min, BL=1, CL=3
750 650 550 ^mA
Icc2h standby current, CKE=H
both banks idle, tCLK=min, CKE=H
100 90 80 ^mA
Icc2l standby current, CKE=L
both banks idle, tCLK=min, CKE=L
10 10 10 ^mA
Icc3 active standby current
both banks active, tCLK=min, CKE=H
175 175 150 ^mA
Icc4 burst current
tCLK=min, BL=4, CL=3, 1 bank idle(discerte) 650 600 500 mA
Icc5 auto-refresh current
tRC=min, tCLK=min
325 300 250 ^mA
Icc6 self-refresh current
CKE <0.2V
55
5 ^mA
AC OPERATING CONDITIONS AND CHARACTERISTICS
(Ta=0 ~ 70°C, Vdd = 3.3 ± 0.3V, Vss = 0V, unless otherwise noted)
Symbol
Parameter
VOH(DC) High-Level Output Voltage(DC)
VOL(DC) Low-Level Output Voltage(DC)
VOIHO(ZAC HOifgf-hs-tLaereveOl uOtpuutptuCt uVroreltnatge(AC)
)VOLI(iAC) _{LInopwu-tLCeuverrleOntutput Voltage(AC)}
Test Condition
IOH=-2mA
IOL=2mA
CQLf=lo5a0tipnFg, VO=0 ~ Vdd
ICVOILHH===50-02p~mFVA, _{dIOd+L=0.23mVA}
Limits
Min. Max. ^Unit
2.4
V
0.4 V
-102 10 uAV
-50 05.80 uAV
MIT-DS-0089-3.0
MITSUBISHI
ELECTRIC
( 30 / 47 )
28.Mar.1997