M5M44405CJ Datasheet, PDF (3/27 Pages) Mitsubishi Electric Semiconductor – EDO ( HYPER PAGE MODE ) 4194304-BIT ( 1048576-WORD BY 4-BIT ) DYNAMIC RAM

MITSUBISHI LSIs
M5M44405CJ,TP-5,-6,-7,-5S,-6S,-7S
EDO ( HYPER PAGE MODE ) 4194304-BIT ( 1048576-WORD BY 4-BIT ) DYNAMIC RAM
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
VI
VO
IO
Pd
Topr
Tstg
Parameter
Supply voltage
Input voltage
Output voltage
Output current
Power dissipation
Operating temperature
Storage temperature
Conditions
With respect to Vss
Ta=25˚C
Ratings
Unit
-1~7
V
-1~7
V
-1~7
V
50
mA
1000
mW
0~70
˚C
-65~150
˚C
RECOMMENDED OPERATING CONDITIONS (Ta=0~70˚C, unless otherwise noted) (Note 1)
Symbol
Parameter
VCC
Supply voltage
VSS
Supply voltage
VIH
High-level input voltage, all inputs
VIL
Low-level input voltage
DQ1~4
others
Note 1 : All voltage values are with respect to Vss.
Limits
Unit
Min Nom Max
4.5
5
5.5
V
0
0
0
V
2.4
6.0
V
-1.0
0.8
V
-2.0
0.8
V
ELECTRICAL CHARACTERISTICS (Ta=0~70˚C, VCC= 5V±10%, VSS=0V, unless otherwise noted) (Note 2)
Symbol
Parameter
Test conditions
Limits
Unit
Min Typ Max
VOH
High-level output voltage
IOH =–5mA
2.4
Vcc
V
VOL
Low-level output voltage
IOZ
Off-state output current
II
Input current
IOL = 4.2mA
0
Q floating 0V ≤ VOUT ≤ 5.5V
-10
0V ≤ VIN ≤ +6.5V, Other inputs pins=0V
-10
0.4
V
10
µA
10
µA
ICC1 (AV)
Average supply current ^{M5M44405C-5,-5S} _{RAS, CAS cycling}
from Vcc, operating
M5M44405C-6,-6S tRC=tWC=min.
(Note 3,4,5) _{M5M44405C-7,-7S output open}
125
100
mA
85
ICC2 (AV)
Supply current from Vcc ,
stand-by
(Note 6)
M5M44405C
M5M44405C(S)
RAS= CAS =VIH, output open
RAS= CAS ≥ VCC–0.5V
output open
2
1
mA
0.1
ICC3 (AV)
Average supply current ^{M5M44405C-5,-5S} RAS cycling, CAS= VIH
from Vcc, refreshing
M5M44405C-6,-6S tRC=min.
(Note 3,5) _{M5M44405C-7,-7S} output open
125
100
mA
85
ICC4(AV)
Average supply current M5M44405C-5,-5S _{RAS=VIL, CAS cycling}
from Vcc, Hyper-Page- M5M44405C-6,-6S _tPC=min.
Mode
(Note 3,4,5) _{M5M44405C-7,-7S output open}
125
100
mA
85
ICC6(AV)
ICC8(AV)
Average supply current
M5M44405C-5,-5S
from Vcc, CAS before
M5M44405C-6,-6S
RAS refresh mode (Mote 3) _{M5M44405C-7,-7S}
Average supply current
from Vcc,
Extended-Refresh cycle
(Note 6)
CAS before RAS refresh cycling
tRC=min.
output open
RAS cycling CAS ≤ 0.2V or CAS
before RAS refresh cycling
RAS ≤ 0.2V or ≥ VCC-0.2V
CAS ≤ 0.2V or ≥ VCC-0.2V
W ≤ 0.2V(Except for RAS falling edge)
or VCC-0.2V
OE ≤ 0.2V or ≥ VCC-0.2V
A0~A9 ≤ 0.2V or ≥ VCC-0.2V,
DQ=open
tRC=125µs, tRAS=tRAS min~1µs
105
85
mA
75
120
µA
ICC9(AV)
Average supply current
from Vcc, Self-Refresh M5M44405C(S)
cycle
(Note 6)
RAS=CAS ≤ 0.2V
output open
120
µA
Note 2 : Current flowing into an IC is positive, out is negative.
Note 3 : ICC1(AV), ICC3 (AV), ICC4(AV) and ICC6(AV) are dependent on cycle rate. Maximum current is measured at the fastest cycle rate.
Note 4 : ICC1(AV) and ICC4(AV) are dependent on output loading. Specified values are obtained with the output open.
Note 5 : Column Address can be changed once or less while RAS=VIL and CAS=VIH.
3 ^{M5M44405CJ,TP-5,-5S:Under development}