English
Language : 

PDSP16510AMA Datasheet, PDF (20/23 Pages) Mitel Networks Corporation – Stand Alone FFT Processor
PDSP16510A MA
ABSOLUTE MAXIMUM RATINGS [See Notes]
Supply voltage Vcc
-0.5V to 7.0V
Input voltage VIN
-0.5V to Vcc + 0.5V
Output voltage VOUT
-0.5V to Vcc + 0.5V
Clamp diode current per pin IK (see note 2)
18mA
Static discharge voltage (HMB)
500V
Storage temperature TS
Junction Temperature, Military
-65°C to 150°C
155°C
Package power dissipation
5000mW
NOTES ON MAXIMUM RATINGS
1. Exceeding these ratings may cause permanent damage.
Functional operation under these conditions is not implied.
2. Maximum dissipation or 1 second should not be exceeded,
only one output to be tested at any one time.
3. Exposure to absolute maximum ratings for extended
periods may affect device reliablity.
4. Current is defined as positive into the device.
ELECTRICAL CHARACTERISTICS
Operating Conditions (unless otherwise state)
PDSP16510A MA Tamb = -55 C to +125°C.
Vcc = 5.0v ± 10%
Characteristic
* Output high voltage
* Output low voltage
* Input high voltage
* Input low voltage
* Input leakage current
† Input capacitance
* Output leakage current
† Output S/C current
Symbol
V
OH
VOL
V
IH
VIL
IIN
CIN
IOZ
ISC
Value
Units Sub group Notes
Min. Typ. Max.
2.4
-
V
1, 2, 3 IOH = 4mA
-
0.4
V
1, 2, 3 IOL = -4mA
2.0
-
V 1, 2, 3 SCLK, DIS, DOS, DEN need 3V
-
0.8
V 1, 2, 3 DEN needs 0.7V max
-10
+10
µA
1, 2, 3 GND < VIN < VCC
10
pF
-50
+50
µA
1, 2, 3 GND < VOUT < VCC
10
300 mA
V = Max
CC
SWITCHING CHARACTERISTICS
Characteristic
Symbol
* Clock Frequency ( MHz )
Ø
† Clock High Period ( ns )
T
CH
† Clock Low Period ( ns )
T
CL
* Max DOS, DIS Frequency
Ø
D
* Note F =
4
6 + 0.001ØT
CL
* Max DIS Frequency
ØD
* Max DOS Frequency
ØD
Min Max
16510A
MA
DC 40
13
10
FØ
Ø
Ø
Sub group
9, 10, 11
9, 10, 11
9, 10, 11
9, 10, 11
All parameters marked * are tested during production
P2a0rameters marked † are guaranteed by design and characterisation
Conditions
Max Ø high time is
1msec
Less than 1024 points
or Multiple Devices
Mode 1.
1024 points
or Multiple Devices
Modes 2 and 3.