SP5669_97 Datasheet, PDF (12/12 Pages) Mitel Networks Corporation – 2.7GHz I2C Bus Controlled Synthesiser

SP5669
PACKAGE DETAILS
Dimensions are shown thus: mm (in). For further package information, please contact your local Customer Service Centre.
9·80/10·01
(0·386/0·394)
0·18/0·25
(0·007/0·010)
16
CHAMFER
REF.
PIN 1
0·35/0·49
(0·014/0·019)
SPOT REF.
0·25/0·51
3·80/4·00 5·80/6·20
(0·150/0·157) (0·228/0·244)
(0·010/0·020)
×45°
0-8°
0·41/1·27
(0·016/0·050)
0·69 (0·027)
MAX
16 LEADS AT
1·27 (0·050)
NOM SPACING
0·10/0·25
1·35/1·91
(0·004/0·010) (0·053/0·075)
NOTES
1. Controlling dimensions are inches.
2. This package outline diagram is for guidance
only. Please contact your Mitel Semiconductor
Customer Service Centre for further
16-LEAD MINIATURE PLASTIC DIL - MP16
Purchase of Mitel Semiconductor I²C components conveys a licence under the Philips I²C Patent rights to use these compo-
nents in an I²C System, provided that the system conforms to the I²C Standard Specification as defined by Philips.
HEADQUARTERS OPERATIONS
MITEL SEMICONDUCTOR
Cheney Manor, Swindon,
Wiltshire SN2 2QW, United Kingdom.
Tel: [phone]
Fax: [phone]
MITEL SEMICONDUCTOR
1500 Green Hills Road,
Scotts Valley, California 95066-4922
United States of America.
Tel [phone]
Fax: [phone]
Internet: http://www.gpsemi.com
CUSTOMER SERVICE CENTRES
q FRANCE & BENELUX Les Ulis Cedex Tel: [phone] Fax : [phone]
q GERMANY Munich Tel: [phone] Fax : [phone]
q ITALY Milan Tel: [phone] Fax: [phone]
q JAPAN Tokyo Tel: [phone] Fax: [phone]
q KOREA Seoul Tel: [phone] Fax: [phone]
q NORTH AMERICA Scotts Valley, USA Tel: [phone] Fax: [phone]
q SOUTH EAST ASIA Singapore Tel:[phone] Fax: [phone]
q SWEDEN Stockholm Tel: [phone] Fax: [phone]
q TAIWAN, ROC Taipei Tel: [phone] Fax: [phone]
q UK, EIRE, DENMARK, FINLAND & NORWAY
Swindon Tel: [phone] Fax : [phone]
These are supported by Agents and Distributors in major countries world-wide.
© Mitel Corporation 1998 Publication No. DS4852 Issue No. 1.3 November 1997
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded
as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company
reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any
guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and
to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
12