MJWI10_15 Datasheet, PDF (3/5 Pages) Minmax Technology Co., Ltd. – DC/DC CONVERTER 10W, High Power Density

®
Power Derating Curve
MJWI10 SERIES
DC/DC CONVERTER 10W, High Power Density
100
80
60
40
20
0
~
-40
0
Natural
Convection
20LFM
100LFM
200LFM
400LFM
20
40
60
80
Ambient Temperature C
100 110
100
80
60
40
20
0
~
-40
0
Natural
Convection
20LFM
100LFM
200LFM
400LFM
20
40
60
80
Ambient Temperature C
100 110
Derating Curve without Heatsink
Derating Curve with Heatsink
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
4 We recommend to protect the converter by a slow blow fuse in the input supply line.
5 Other input and output voltage may be available, please contact factory.
6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM)
7 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
25.4 [1.00]
10.16
[0.40]
10.16
[0.40]
3
4
5
Bottom View
6.0 10.16 0.5
[0.24] [0.40 0.02]
Pin Connections
Pin
Single Output
1
+Vin
2
-Vin
3
+Vout
4
No Pin
5
-Vout
6
Remote On/Off
Dual Output
+Vin
-Vin
+Vout
Common
-Vout
Remote On/Off
1
2
6
5.08 7.62
[0.20] [0.30]
2.54
[0.10]
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pin diameter  1.0 ±0.05 (0.04±0.002)
Physical Characteristics
Case Size
: 25.4x25.4x10.16mm (1.0x1.0x0.4 inches)
Case Material
: Aluminium Alloy, Black Anodized Coating
Base Material
: FR4 PCB (flammability to UL 94V-0 rated)
Pin Material
: Copper Alloy with Gold Plate Over Nickel Subplate
Weight
: 15g
E-mail:[e-mail] Tel:[phone]
2016/06/16 REV:20 Page 3 of 5