PMA-545_15 Datasheet, PDF (5/6 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic Low Noise E-PHEMT MMIC Amplifier
Product Marking
MCL
545
black body
model family designation
PMA-545+
Additional Detailed Technical Information
Additional information is available on our web site www.minicircuits.com. To access this information
enter the model number on our web site home page.
Performance data, graphs, s-parameter data set (.zip file)
Case Style: DQ849
Plastic package, exposed paddle, lead finish: tin-silver over nickel
Tape & Reel: F104
Standard quantities availabe on reel: 7” reels with 20, 50, 100, 200, 500, 1K, or 2K devices.
Suggested Layout for PCB Design: PL-299
Evaluation Board: TB-501+
Environmental Ratings: ENV08T1
Recommended Application Circuit
(refer to evaluation board for PCB Layout and component values)
I_{d +3V (Vs)}
I_Rbias
I_ds
C3
RF-IN
L2
Rbias
432Ω
L1
C1
7
C2
1
6
RF-OUT
Paddle
Fig 2. Recommended Application Circuit
Note: Resistance of L1, 0.1-0.2Ω typically
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 5 of 6