PMA-545_15 Datasheet, PDF (1/6 Pages) Mini-Circuits – Monolithic Amplifier

Low Noise, High IP3
Monolithic Amplifier
50Ω 0.05 to 6 GHz
PMA-545+
The Big Deal
• Ultra Low Noise Figure, 0.8 dB
• Ultra High IP3
• Up to 6 GHz
3mm x 3mm MCLP [ EIA: QFN) Pkg
☛ LTE Performance
Product Overview
Mini-Circuits PMA-545+ is a E-PHEMT based Ultra-Low
Noise MMIC Amplifier operating from 50 MHz to 6 GHz with
a unique combination of low noise and high IP3 making this
amplifier ideal for sensitive receiver applications. This design
operates on a single 3V supply and is internally matched to
50 Ohms.
Summary Performance at 1 GHz
Operating Frequency: 0.05 to 6.0
GHz
Noise Figure
0.8
dB, typ.
Gain
20
dB, typ.
IP3
+36
dBm, typ.
P_OUT (at 1dB)
DC Current (at 3V)
+20
dBm, typ.
80
mA, typ.
Key Features
Feature
Ultra Low Noise: 0.8 dB NF at 1GHz
Advantages
Industry Leading Noise Figure, measured in a 50 Ohm environment – without any
external matching
High IP3:
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise
+36 dBm IP3 at 1GHz Receiver Front End (RFE) because it gives the user advantages at both ends of the
dynamic range: sensitivity & two-tone IM dynamic range
Output Power:
+20 dBm at 1GHz
Broad Band:
0.05 to 6.0GHz
Internally Matched
MCLP Package
Max Input Power +20 dBm
High Reliability
The PMA-545+ maintains consistent output power capability over the full operating
temperature range making it ideal to be used in remote applications such as LNB’s
as the L Band driver stage
Broadband covering primary wireless communications bands: Cellular, PCS, LTE,
WiMAX
No external matching elements required to achieve the advertized noise and output
power over the full band
Low Inductance, repeatable transitions, excellent thermal pad
Ruggedized design operates up to input powers often seen at Receiver inputs. Can
operate up to + 20dBm without the need of an external limiter
Low, small signal operating current of 80 mA nominal maintains junction tempera-
tures typically below 130°C at 85°C ground lead temperature
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 1 of 2