HXG-242 Datasheet, PDF (3/5 Pages) Mini-Circuits – Ultra High IP3 Amplifier Module

Ultra High IP3 Amplifier Module
HXG-242+
Electrical Specifications⁽¹⁾ at 25°C and 5V, unless noted
Parameter
Condition (GHz)
Frequency Range
Gain
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Input Return Loss
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Output Return Loss
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Reverse Isolation
2.0
Output Power @1 dB compression
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Output IP3
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Noise Figure
0.7
0.9
1.2
1.5
1.8
2.1
2.4
Device Operating Voltage (V_d)
Device Operating Current
Device Current Variation vs. Temperature⁽²⁾
Device Current Variation vs Voltage
Thermal Resistance, junction-to-ground lead
(1) _{Measured on Mini-Circuits Characterization test board TB-640+. See Characterization Test Circuit (Fig.1)}
(2) _{Current at 85°C —­ Current at -45°C)/130}
Min.
0.7
—
—
—
—
13.0
—
—
—
—
—
42.0
42.0
—
—
4.8
110
Absolute Maximum Ratings
LSL
Parameter
Operating Temperature (ground lead)
Storage Temperature
Operating Current at 5V
Ratings
-40°C to 85°C
-65°C to 150°C
210 mA
Power Dissipation
1W
Input Power (CW)
24 dBm
DC Voltage on Pin 3
6V
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
Typ.
16.0
15.9
15.3
14.9
14.4
14.0
13.6
17.5
15.8
13.7
11.6
9.7
7.8
6.3
19.1
18.8
18.2
17.9
16.5
14.7
12.5
20.0
22.2
22.3
22.6
22.9
23.0
23.2
23.3
41.3
41.7
44.2
45.7
44.4
45.0
42.9
2.2
2.3
2.3
2.3
2.4
2.5
2.5
5.0
140
+14
0.05
85
Max.
2.4
—
—
—
—
15.8
—
—
—
—
—
—
—
—
—
5.2
180
DC Current Histogram
DC Current (mA)
LSL=Lower Spec Limit
USL=Upper Spec Limit
Units
GHz
dB
dB
dB
dB
dBm
dBm
dB
V
mA
µA/°C
mA/mV
°C/W
USL
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 3 of 4