HXG-242 Datasheet, PDF (2/5 Pages) Mini-Circuits – Ultra High IP3 Amplifier Module

®
Mini-Circuits System In Package
Ultra High IP3 Amplifier Module 0.7-2.4 GHz
Product Features
• Ultra High IP3, +46 dBm typ. at 1.5 GHz
• Gain, 14.3 dB typ. at 2 GHz
• High Pout, P1dB +23 dBm typ.
• Low noise figure, 2.4 dB
• Internally matched for optimized IP3 performance
• No external matching components required
Typical Applications
• Base station infrastructure
• Portable Wireless
• LTE
HXG-242+
CASE STYLE: LZ1671
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
☛ LTE Performance
General Description
The HXG-242+ (RoHS compliant) is an advanced amplifier module in a Mini-Circuits System in Package
(MSiP) which includes internal matching networks to offer extremely high dynamic range module. It is
housed in a ceramic package 6.4mm x 7.0mm x 2.4mm.
simplified schematic and pin description
RF-IN
RF-OUT
and DC-IN
GND
Function
RF IN
RF-OUT and DC-IN
GND
Pin Number
2
5
1,3,4,6
Description
RF input pin. This pin requires the use of an external DC blocking capacitor chosen for
the frequency of operation.
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended Ap-
plication Circuit”, Fig. 2
Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design”
to reduce ground path inductance for best performance.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
REV. B
M151107
HXG-242+
TH/RS/CP
150731
Page 2 of 2