GVA-62 Datasheet, PDF (3/5 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic InGap HBT MMIC Amplifier
GVA-62+
Electrical Specifications^1,2 at 25°C, unless noted
Parameter
Condition
(GHz)
Frequency Range²
Gain
0.05
0.8
2.0
3.0
4.0
6.0
Gain Flatness
0.05 - 3.0
0.7 - 2.6
Input Return Loss
0.05
0.8
2.0
3.0
4.0
6.0
Output Return Loss
0.05
0.8
2.0
3.0
4.0
6.0
Reverse Isolation
2.0
Output Power @1 dB compression
0.05
0.8
2.0
3.0
4.0
6.0
Output IP3
0.05
1.0
2.0
3.0
4.0
6.0
Noise Figure
0.05
1.0
2.0
3.0
4.0
6.0
Device Operating Voltage
Device Operating Current
Device Current Variation vs. Temperature³
Device Current Variation vs. Voltage
Thermal Resistance, junction-to-ground lead
(1) _{Measured on Mini-Circuits Characterization test board TB-313. See Characterization Test Circuit (Fig. 1)}
(2) _{Low Frequency cut-off determined by external coupling capacitors and external bias choke.}
(3) _{Current at 85°C —­ Current at -45°C)/130}
Min.
0.01
14.8
13.9
—
—
13.5
—
—
10.0
—
—
—
—
—
12.0
—
—
—
—
17.5
17.5
17.2
—
—
—
—
—
31.5
—
—
—
—
—
—
—
—
—
4.8
72
Typ.
16.5
15.6
15.4
15.3
15.0
14.5
±0.7
±0.2
16.5
13.7
13.9
15.9
19.3
20.7
12.8
17.4
17.1
15.0
12.4
8.8
21.9
19.7
19.8
19.2
17.8
15.9
11.7
37.8
37.5
33.6
30.4
28.1
23.0
4.7
5.0
5.1
5.1
5.2
5.6
5.0
82
62
0.035
64
Max.
6
18.2
17.2
—
—
16.5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.2
—
6.6
—
—
—
5.2
92
Units
GHz
dB
dB
dB
dB
dB
dBm
dB
dB
V
mA
µA/°C
mA/mV
°C/W
Absolute Maximum Ratings
Parameter
Operating Temperature (ground lead)
60
Ratings
50
-40°C to 85°C
Storage Temperature
-65°C to 150°C
40
Operating Current at 5V
120 mA
30
Power Dissipation
0.725 W
20
Input Power (CW)
24 dBm
10
DC Voltage on Pin 3
Note:
6V
0
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
For continuous operation, do not exceed 5.2V device voltage.
DC Current (mA)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 3 of 4