CMA-252LN Datasheet, PDF (3/6 Pages) Mini-Circuits – Monolithic Amplifier

Monolithic E-PHEMT MMIC Amplifier
CMA-252LN+
Electrical Specifications⁽¹⁾ at 25°C, unless noted
Parameter
Condition
(GHz)
Min.
Vs=4V
Typ.
Max.
Frequency Range
1.5
2.5
1.5
0.7
1.8
0.8
Noise Figure
2.0
1.0
2.2
1.1
2.5
1.3
1.5
1.8
Gain
2.0
2.2
2.5
1.5
1.8
Input Return Loss
2.0
2.2
2.5
1.5
1.8
Output Return Loss
2.0
2.2
2.5
1.5
1.8
Output Power @1 dB compression ⁽²⁾
2.0
2.2
2.5
1.5
1.8
Output IP3
2.0
2.2
2.5
Device Operating Voltage
Device Operating Current at typ. voltage⁽²⁾
DC Current Variation Vs. Temp. at typical voltage⁽³⁾
DC Current Variation Vs. Voltage
Thermal Resistance
19.2
18.3
16.8
16.1
15.1
19.0
15.0
13.8
13.0
12.5
10.0
22.5
16.5
11.2
7.6
18.5
17.9
17.8
17.4
16.1
31.1
30.1
30.0
29.3
27.6
3.8
4.0
4.2
57
70
-19
0.018
53
(1) _{Measured on Mini-Circuits Characterization test board TB-759+. See Characterization Test Circuit (Fig. 1) R1=825Ω, Rbias=619Ω}
(2) _{Current increases at P1dB}
(3) _{(Current at 85°C -­ Current at -45°C)/130}
Vs=3V
Typ.
0.7
0.9
1.0
1.2
1.3
18.6
17.6
16.2
15.4
14.2
14.0
12.4
11.8
11.6
11.1
10.6
26.0
16.0
10.8
7.1
16.2
15.9
15.6
15.3
13.9
27.1
25.5
25.3
24.8
23.2
3.0
41
-3.4
0.017
53
Units
GHz
dB
dB
dB
dB
dBm
dBm
V
mA
µA/°C
mA/mV
°C/W
DC Current Histogram at Vs=4V
Absolute Maximum Ratings⁽⁴⁾
70
60
Parameter
Ratings
50
Operating Temperature (ground lead)
-55°C to 105°C
40
Storage Temperature
Junction Temperature
Total Power Dissipation
Input Power (CW), Vs=3V or 4V
-65°C to 125°C
30
150°C
20
0.55 W
10
+25 dBm (5 min. max)
+20 dBm (continuos)
0
DC Voltage
5.5V
(5) _{Permanent damage may occur if any of these limits are exceeded.}
Current (mA)
Electrical maximum ratings are not intended for continuous normal operation.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 3 of 6