SAV-551 Datasheet, PDF (2/13 Pages) Mini-Circuits – E-PHEMT 0.45-6GHz

E-PHEMT
SAV-551+
Electrical Specifications at T_AMB=25°C, Frequency 0.45 to 6 GHz
Symbol
Parameter
Condition
Min.
V_GS
V_TH
I_DSS
G_M
I_GSS
NF⁽¹⁾
Operational Gate Voltage
Threshold Voltage
Saturated Drain Current
Transconductance
Gate leakage Current
Noise Figure
DC Specifications
V_DS=3V, I_DS=15 mA
V_DS=3V, I_DS=4 mA
V_DS=3V, V_GS=0 V
V_DS=3V, Gm=∆ I_DS/∆V_GS
∆V_GS=V_GS1-V_GS2
V_GS1=V_GS at I_DS=15 mA
V_GS2=V_GS1+0.05V
V_GD=V_GS=-3V
RF Specifications, Z₀=50 Ohms (Figure 1)
V_DS=3V, I_DS=15 mA
f=0.9 GHz
f=2.0 GHz
f=3.9 GHz
f=5.8 GHz
0.22
0.18
—
—
215
—
—
Gain
Gain
V_DS=4V, I_DS=15 mA
V_DS=3V, I_DS=15 mA
f=2.0 GHz
f=0.9 GHz
—
f=2.0 GHz
14.4
f=3.9 GHz
—
f=5.8 GHz
—
OIP3
Output IP3
V_DS=4V, I_DS=15 mA
V_DS=3V, I_DS=15 mA
f=2.0 GHz
—
f=0.9 GHz
—
f=2.0 GHz
20.0
f=3.9 GHz
—
f=5.8 GHz
—
P1dB⁽²⁾
Power output at 1 dB
Compression
V_DS=4V, I_DS=15 mA
V_DS=3V, I_DS=15 mA
f=2.0 GHz
—
f=0.9 GHz
—
f=2.0 GHz
16.0
f=3.9 GHz
—
f=5.8 GHz
—
V_DS=4V, I_DS=15 mA
f=2.0 GHz
—
Typ.
0.34
0.26
1.0
—
—
251
—
—
0.5
0.6
1.0
1.8
0.6
20.9
15.9
11.2
7.6
16.0
22.4
24.3
26.9
28.5
24.4
17.2
17.5
18.5
17.5
20.0
Max. Units
0.46
V
0.38
V
5.0
µA
—
—
285
mS
—
—
95
µA
—
0.9
—
dB
—
—
17.5
—
dB
—
—
dBm
dBm
Absolute Maximum Ratings⁽³⁾
Symbol
Parameter
Max.
VDS(4)
Drain-Source Voltage
5
VGS(4)
Gate-Source Voltage
-5 to 0.7
VGD(4)
Gate-Drain Voltage
-5 to 0.7
IDS(4)
Drain Current
100
IGS
Gate Current
2
PDISS
Total Dissipated Power
360
PIN(5)
RF Input Power
17
TCH
Channel Temperature
150
TOP
Operating Temperature
-40 to 85
TSTG
Storage Temperature
-65 to 150
ΘJC
Thermal Resistance
160
Notes:
(1) Includes test board loss (tested on Mini-Circuits TB-471+ test board)
(2) Drain current was allowed to increase during compression measurements.
(3) Operation of this device above any one of these parameters may cause permanent damage.
(4) Assumes DC quiescent conditions.
(5) I_GS is limited to 2 mA during test.
Units
V
V
V
mA
mA
mW
dBm
°C
°C
°C
°C/W
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
Page 2 of 13