SAV-551 Datasheet, PDF (1/13 Pages) Mini-Circuits – E-PHEMT 0.45-6GHz

Ultra Low Noise, Medium Current
E-PHEMT
0.45-6GHz
Product Features
• Low Noise Figure, 0.5 dB
• Gain, 16 dB at 2 GHz
• High Output IP3, +25 dBm
• Output Power at 1dB comp., +18 dBm
• Low Current, 15mA
• Wide bandwidth
• External biasing and matching required
• May be used as replacement ^a,b for Avago ATF-55143
SAV-551+
CASE STYLE: MMM1362
PRICE: $0.99 ea. QTY. (20)
Typical Applications
• Cellular
• ISM
• GSM
• WCDMA
• WiMax
• WLAN
• UNII and HIPERLAN
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
General Description
SAV-551+ is an ultra-low noise, high IP3 transistor device, manufactured using E-PHEMT* technology
enabling it to work with a single positive supply voltage. It has outstanding Noise Figure, particularly be-
low 2.5 GHz, and when combining this noise figure with high IP3 performance in a single device it makes
it an ideal amplifier for demanding base station applications. We offer these units assembled into a com-
plete module, 50Ω in/out, noise matched and fully specified. For more information please see our TAMP
family of models on our web site.
simplified schematic and pin description
DR AIN
DR AIN 1
4 SOUR CE
G AT E
SOUR CE
SOUR CE 2
3 GATE
SOT-343 (SC-70) PACKAGE
Function
Pin Number
Description
Source
2&4
Source terminal, normally connected to ground
Gate
3
Gate used for RF input
Drain
1
Drain used for RF output
* Enhancement mode Pseudomorphic High Electron Mobility Transistor.
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical perfor-
mance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The Avago ATF-55143 part number is used for identification and comparison purposes only.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits^®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 [phone] [e-mail]
REV. C
M123887
ED-13377
SAV-551+
150319
Page 1 of 13