XR1007-QD_10 Datasheet, PDF (1/7 Pages) Mimix Broadband – 10.0-18.0 GHz GaAs Receiver

10.0-18.0 GHz GaAs Receiver
QFN, 7x7 mm
November 2010 - Rev 14-Nov-10
Features
Integrated LNA, LO Buffer, Image Reject Mixer
7x7 mm, QFN
+2.0 dBm LO Drive Level
2.7 dB Noise Figure
20.0 dB Image Rejection
100% RF, DC and Noise Figure Testing
R1007-QD
General Description
Mimix Broadband’s 10.0-18.0 GHz GaAs packaged receiver has a
noise figure of 2.7 dB and 20.0 dB image rejection across the
band. This device is a two stage LNA followed by an image reject
mixer which includes an integrated LO buffer amplifer. The
image reject mixer eliminates the need for a bandpass filter
after the LNA to remove thermal noise at the image frequency. I
and Q mixer outputs are provided and an external 90 degree
hybrid is required to select the desired sideband. This device
uses Mimix Broadband’s GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure high
repeatability and uniformity. The device comes in a 7x7 mm QFN
Surface Mount Laminate Package offering excellent RF and
thermal properties and is RoHS compliant. This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM
and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+5.0 VDC
Supply Current (Id1,Id2)
200, 250 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (RF Pin)
+17 dBm
Storage Temperature (Tstg) -65 to +165 ^OC
Operating Temperature (Ta) -55 to MTTF Table³
Channel Temperature (Tch) MTTF Table³
Moisture Sensitivity Level MSL3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25^o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
Frequency Range (LO)
Frequency Range (IF)
Input Return Loss RF (S11)
GHz
10.0
-
18.0
GHz
8.0
-
20.0
GHz
DC
-
4.0
dB
-
15.0
-
Small Signal Conversion Gain RF/IF
LO Input Drive (PLO)
Image Rejection²
dB
-
13.5
-
dBm
-
+2.0
-
dBc
-
20.0
-
Noise Figure (NF)²
Isolation LO/RF @ LOx1/LOx2
Input Third Order Intercept (IIP3)^1,2
Drain Bias Voltage (Vd1)
dB
-
2.7
-
dB
-
40.0
-
dBm
-
+4.0
-
VDC
-
+4.0
+4.5
Drain Bias Voltage (Vd2)
Gate Bias Voltage (Vg1,2)
Supply Current (Id1) (Vd1=4.0V, Vg=-0.3V Typical)
VDC
-
+4.0
+4.5
VDC
-1.2
-0.3
+0.1
mA
-
80
120
Supply Current (Id2) (Vd2=4.0V,Vg=-0.3V Typical)
mA
-
100
150
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.