XP1058-BD Datasheet, PDF (1/12 Pages) Mimix Broadband – 14.5-16.0 GHz GaAs MMIC Power Amplifier

14.5-16.0 GHz GaAs MMIC
Power Amplifier
January 2010 - Rev 04-Jan-10
P1058-BD
Features
5W Power Amplifier
Dual Sided Bias Architecture
27.0 dB Small Signal Gain
+36.0 dBm P1dB Compression Point
+38.0 dBm Pulsed Saturated Output Power
+46.0 dBm Output Third Order Intercept
100% On-Wafer DC, RF and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
General Description
Mimix Broadband’s four stage 14.5-16.0 GHz GaAs MMIC
power amplifier has a small signal gain of 27.0 dB with +37.0
dBm saturated output power. This MMIC uses Mimix
Broadband’s GaAs PHEMT device model technology, and is
based upon optical lithography to ensure high repeatability
and uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes and gold
metallization to allow either a conductive epoxy or eutectic
solder die attach process. This device is well suited for
Military, Space, Microwave Point-to-Point Radio, SATCOM and
VSAT applications.
Chip Device Layout
XP1058-BD
Absolute Maximum Ratings¹
Supply Voltage (Vd)
+8.0 VDC
Supply Current (Id1,2,3,4) 200,400,800,2200 mA
Gate Bias Voltage (Vg)
+0.3 VDC
Input Power (Pin)
+30.0 dBm
Storage Temperature (Tstg) -65 to +165 ºC
Operating Temperature (Ta) -55 to +85 ºC
Channel Temperature (Tch) 175 ºC
(1) Channel temperature affects a device’s MTTF. It is
recommended to keep channel temperature as low as possible
for maximum life
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Units
Min
Typ
Frequency Range (f)
GHz
14.5
-
Input Return Loss (S11)
dB
-
10.0
Output Return Loss (S22)
Small Signal Gain (S21)²
dB
-
10.0
dB
-
27.0
Gain Flatness (delta S21)
Reverse Isolation (S12)
dB
-
+/-1.0
dB
-
60.0
Output Power for 1dB Compression Point (P1dB)
Output Third Order Intermods (OIP3)
dBm
-
+36.0
dBm
-
+46.0
Saturated Output Power (Psat)²
Drain Bias Voltage (Vd1,2,3,4)
Gate Bias Voltage (Vg1,2,3,4)
Supply Current (Id1) (Vd=8.0 V,Vg=-0.8 V Typical)
Supply Current (Id2) (Vd=8.0 V,Vg=-0.8 V Typical)
dBm
-
+37.0
VDC
-
+7.5
VDC
-1.5
-0.8
mA
-
125
mA
-
250
Supply Current (Id3) (Vd=8. 0 V, Vg=-0.8 V Typical)
mA
-
500
Supply Current (Id4) (Vd=8.0 V, Vg=-0.8 V Typical)
mA
-
1350
(2) Measured on wafer pulsed.
Max
16.0
-
-
-
-
-
-
-
-
+7.8
0.0
150
300
600
1650
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 12
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.