CMM1100-BD_10 Datasheet, PDF (1/9 Pages) Mimix Broadband – 2.0-18.0 GHz GaAs MMIC

2.0-18.0 GHz GaAs MMIC
Low Noise Amplifier
February 2010 - Rev-05-Feb-10
Features
Self Bias Architecture
17.0 dB Small Signal Gain
3.5 dB Noise Figure
+16.0 dBm P1dB Compression Point
100% Commercial-Level Visual Inspection Using
Mil-Std-883 Method 2010
CMM1100-BD
Chip Device Layout
General Description
Mimix Broadband’s two stage 2.0-18.0 GHz GaAs MMIC
low noise amplifier has a small signal gain of 17.0 dB
with a noise figure of 3.5 dB across the band. This MMIC
uses Mimix Broadband’s GaAs PHEMT device model
technology, and is based upon optical lithography to
ensure high repeatability and uniformity. The chip has
surface passivation to protect and provide a rugged
part with backside via holes and gold metallization to
allow either a conductive epoxy or eutectic solder die
attach process. This device is well suited for fiber optic,
microwave radio, military, space, telecom infrastructure,
test instrumentation and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)¹
+8.0 VDC
180 mA
+10 dBm
-65 to +165 ºC
-55 to +85 ºC
+175 ºC
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 ^oC)
Parameter
Frequency Range (f )
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness ( S21)
Reverse Isolation (S12)
Noise Figure (NF)
Output Power for 1 dB Compression (P1dB)
Output Second Order Intercept Point (OIP2)
Output Third Order Intercept Point (OIP3)
Drain Bias Voltage (Vd1,2)
Supply Current (Id) (Vd1,2=5.0V)
Units
GHz
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
VDC
mA
Min.
2.0
6.0
8.0
14.0
-
-
-
+13.0
-
-
-
90
Typ.
-
9.0
17.0
17.0
+/-0.5
40.0
3.5
+16.0
+33.0
+26.0
+5.0
100
Max.
18.0
-
-
-
-
-
5.0
-
-
-
+7.0
120
100% on-wafer DC testing and 100% RF wafer qualification. Wafer qualification includes sample testing from each quadrant
with an 80% pass rate required.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 9
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.