20DBL0629 Datasheet, PDF (1/6 Pages) Mimix Broadband – 18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier

18.0-21.0/36.0-42.0 GHz GaAs MMIC
Doubler and Power Amplifier
September 2005 - Rev 01-Sep-05
20DBL0629
Features
Integrated Doubler and Power Amplifier
Excellent Saturated Output Stage
+26.0 dBm Output Power
50.0 dBc Fundamental Suppression
100% On-Wafer RF, DC and Output Power Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
n
General Description
Mimix Broadband's 18.0-21.0/36.0-42.0 GHz GaAs MMIC
doubler integrates a doubler and 4-stage power amplifier.
The device provides better than +26.0 dBm output power
tio _{Absolute Maximum Ratings}
and has excellent fundamental rejection. This MMIC uses
Mimix Broadband’s 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam lithography
to ensure high repeatability and uniformity. The chip has
surface passivation to protect and provide a rugged part
with backside via holes and gold metallization to allow
c^{Supply Voltage (Vd)}
Supply Current (Id)
Gate Bias Voltage (Vg)
u^{Input Power (RF Pin)}
Storage Temperature (Tstg)
+6.0 VDC
800 mA
+0.3 VDC
TBD
-65 to +165 ^OC
either a conductive epoxy or eutectic solder die attach
process. This device is well suited for Millimeter-wave Point-
to-Point Radio, LMDS, SATCOM and VSAT applications.
dOperating Temperature (Ta) -55 to MTTF Table1
Channel Temperature (Tch) MTTF Table¹
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
o_o
r _{Electrical Characteristics (Ambient Temperature T = 25 C)}
Parameter
Input Frequency Range (fin)
p _{Output Frequency Range (fout)}
- _{Input Return Loss (S11)}
Units Min. Typ. Max.
GHz
18.0
-
21.0
GHz
36.0
-
42.0
dB
-
TBD
-
Output Return Loss (S22)
Fundamental Rejection
e _{RF Input Power (RF Pin)}
r_{Output Power at 0.0 dBm Pin (Pout)}
Drain Supply Voltage (Vd1) Doubler
P^{Drain Supply Voltage (Vd2) Buffer Amp}
Drain Supply Voltage (Vd3,4,5,6) PA
Gate Supply Voltage (Vg1) Doubler
dB
-
12.0
-
dBc
-
50.0
-
dBm
-
0.0
-
dBm
-
+26.0
-
V
-
2.5
3.0
V
-
3.0
4.0
V
-
4.5
5.5
V
-
-1.2
-
Drain Supply Current (Id1) Doubler
mA
-
<1.0
-
Drain Supply Current (Id2) Buffer
mA
-
20
25
Drain Supply Current (Id3,4,5,6) (Vg=-0.7V Typical) PA
mA
-
530
600
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: [phone] Fax: [phone] mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.