MYXPM6021 Datasheet, PDF (1/113 Pages) Micross Components – Tin-lead ball metallurgy

MYXPM6021*
*Advanced information. Subject to change without notice.
Power Management IC (PMIC)
Features
• Intel^® Atom Bay Trail PMIC
• Tin-lead ball metallurgy
• Part number MYXPM6021
• Two high efficiency buck converters with integrated
SVID interface running IMVP-7 protocol. These two
quad phase DC/DC regulators generate the voltages for
CPU and graphic cores
• 3 channel PWM signal generation, flexible frequency and
duty cycle programmable
• Input power source detection, included with charger
control
• 325 ball FCBGA 11mm x 6mm, 0.4mm pitch package
• Operating Temp Range: -30C - +85C
• One dual phase buck regulator for memory supply
supporting DDR3-L and -LP memory types
• 3 single phase buck regulators supplying 1.0V, 1.05V
and 1.8V towards the platform
• 2 buck-boost converters generating 2.85V and 3.3V for
the platform even if the input supply is down to 2.7V
• Boost converter providing 5V for the USB components
• 3 LDOs with fixed output voltage
• 2 LDOs with programmable output voltage
• 1 push-pull LDO used for DDR3 address line termination
• 11 integrated power rail switching devices
• 9 external power rail switching devices
• Ultra flexible power sequencer programmable via OTP/
EEPROM and register
• I2C communication interface for SoC access
• EEPROM interface for optional OTP over-writing
• 16 general purpose I/Os with alternate functions
• 16 channel 10-bit ADC including conditioning circuits
and programmable flexible sequencing for automatic
and manual measurements
• System voltage and temperature monitoring, supervising
• Programmable IRQ controller
• 1-wire digital battery interface including 2-wire
conversion
Please contact a Micross sales representative for IBIS or
thermal models at [e-mail].
MYXPM6021*
Revision 1.1 - 10/21/14
1
Form #: CSI-D-685 Document 011