A3PN030-ZQNG48 Datasheet, PDF (49/114 Pages) Microsemi Corporation – ProASIC3 nano Flash FPGAs

ProASIC3 nano Flash FPGAs
Table 2-48 • 1.8 V LVCMOS Low Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.7 V
Software Default Load at 10 pF for A3PN020, A3PN015, A3PN010
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.60
t_DP
8.52
t_DIN
0.04
t_PY
1.35
t_PYS
1.90
t_EOUT
0.43
t_ZL
7.99
t_ZH
8.52
t_LZ
2.23
t_HZ Units
1.78 ns
–1
0.51 7.25 0.04 1.15 1.61 0.36 6.80 7.25 1.90 1.51 ns
–2
0.45 6.36 0.03 1.01 1.42 0.32 5.97 6.36 1.67 1.33 ns
4 mA
Std.
0.60 6.59 0.04 1.35 1.90 0.43 6.44 6.59 2.63 2.78 ns
–1
0.51 5.60 0.04 1.15 1.61 0.36 5.48 5.60 2.23 2.37 ns
–2
0.45 4.92 0.03 1.01 1.42 0.32 4.81 4.92 1.96 2.08 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-5 for derating values.
Table 2-49 • 1.8 V LVCMOS High Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.7 V
Software Default Load at 10 pF for A3PN020, A3PN015, A3PN010
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.60
t_DP
4.79
t_DIN
0.04
t_PY
1.35
t_PYS
1.90
t_EOUT
0.43
t_ZL
4.27
t_ZH
4.79
t_LZ
2.23
t_HZ Units
1.84 ns
–1
0.51 4.08 0.04 1.15 1.61 0.36 3.63 4.08 1.89 1.57 ns
–2
0.45 3.58 0.03 1.01 1.42 0.32 3.19 3.58 1.66 1.37 ns
4 mA
Std.
0.60 3.22 0.04 1.35 1.90 0.43 3.24 3.22 2.62 2.89 ns
–1
0.51 2.74 0.04 1.15 1.61 0.36 2.75 2.74 2.23 2.45 ns
–2
0.45 2.40 0.03 1.01 1.42 0.32 2.42 2.40 1.95 2.15 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-5 for derating values.
Revision 11
2- 35