JANTX1N5618US Datasheet, PDF (3/3 Pages) Microsemi Corporation – VOIDLESS-HERMETICALLY-SEALED SURFACE MOUNT STANDARD RECOVERY GLASS RECTIFIERS

SCOTTSDALE DIVISION
1N5614US thru 1N5622US
VOIDLESS-HERMETICALLY-SEALED
SURFACE MOUNT STANDARD
RECOVERY GLASS RECTIFIERS
PACKAGE DIMENSIONS AND PAD LAYOUT
NOTE: This Package Outline has also previously
been identified as “D-5A”
BD
BL
ECT
S
INCHES
MIN MAX
.097 .103
.185 .200
.019 .028
.003
---
mm
MIN MAX
2.46 2.62
4.70 5.08
0.48 0.71
0.08
---
PAD LAYOUT
INCHES
mm
A
0.246
6.25
B
0.067
1.70
C
0.105
2.67
Note: If mounting requires adhesive
separate from the solder, an additional
0.060 inch diameter contact may be
placed in the center between the pads
as an optional spot for cement.
Copyright © 2009
10-06-2009 REV D; SA7-45.pdf
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 3