DRF200G Datasheet, PDF (3/4 Pages) Microsemi Corporation – MOSFET Driver

DRF200G
Figure 2, DRF200 Test Circuit
The Test Circuit illustrated above was used to evaluate the DRF200 (available as an evaluation Board DRF2XX / EVALSW.) The input control
signal is applied to the DRF200 via IN(1) and SG(2) pins using RG188. This provides excellent noise immunity and control of the signal
ground currents.
The +V_DD input (4) is by-passed by C1. The capacitor used for this function must be capable of supporting the RMS currents and frequency of
the gate load.
Microsemi’s products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583
4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 and foreign patents. US and Foreign patents pending. All Rights Reserved.