A3P060-VQG100 Datasheet, PDF (23/27 Pages) Microsemi Corporation – Terrestrial FPGA and SoC Product Catalog

IGLOO nano Starter Kit
20 MHz IGLOO nano
Clock Oscillator FPGA
I/O Test Pin
Headers
USB
Interface
5 V Wall
Jack
Jumper
for Battery
Option
Jumpers
for Voltage
Options
Flash*Freeze
Switch
Push-Button
Reset Switch
LCPS
Connector
Jumpers to
Isolate User LEDs,
Push-Button
Switches, DIP
Switches for
I/O Test Pins
4 Push-Button
Switches
• Supports basic IGLOO nano
low power FPGA design, including
Flash*Freeze mode
• Free one-year Libero IDE software
and Gold license
• Low-cost programming
stick (LCPS)
• Two USB cables
• Kit user’s guide, Libero IDE
tutorial and design examples
• PCB schematics, layout files
and BOM
• Board features
- All I/Os available for external
connections
- Full current measurement
capability of independent
I/O banks and VCC
- USB connection for USB-to-
serial (RS232) interface for
HyperTerminal or power
- 20 MHz clock oscillator
- LEDs and switches for simple
inputs and outputs
- Ability to switch VCORE from
1.2 V to 1.5 V
- RoHS compliant
Current Measurement 8 DIP Switches
Headers
8 User LEDs
Ordering Code
AGLN-NANO-KIT*
Note:
* Replaces -Z version of the nano Starter Kit.
Supported Device
AGLN250V2-VQG100
Price
$ 99
ProASIC3 Starter Kit
LCD Display
Module
Wall Mount
Power
Interboard ISP
Connector
CAT5E RJ45
Connectors
for LVDS
Communications
Removable
Shunts to
Isolate All I/Os
for Prototyping
Oscillator for
System
Clock
Manual
Clock Option
SMA for
Optional
External
Oscillator
8 LEDs
4 Switches
Removable
Shunts to
Isolate All I/Os
for Prototyping
FlashPro3
ISP Connector
ProASIC3/E in
PQ208 Package
Every PQ208
Pin Accessible
for Prototyping
Removable Shunts to Isolate
All I/Os for Prototyping
• Supports basic ProASIC3 FPGA
design and LVDS I/O usage
• Free one-year Libero IDE software
and Gold license
• FlashPro3 or FlashPro4
Programmer
• 9 V power supply and
international adapters
• Kit user’s guide, Libero IDE
tutorial and design examples
• PCB schematics, layout files
and BOM
• Board features
- Eight I/O banks with variety of
voltage options
- Oscillator for system clock or
manual clock option
- LEDs and switches for simple
inputs and outputs
- LCD display module
- Two CAT5E RJ45 connectors for
high-speed LVDS communications
- All I/Os available for external
connections
- Not RoHS compliant
Ordering Codes
A3PE-PROTO-KIT
Supported Devices
A3PE1500-PQ208
Price
$ 665
Fusion Embedded Development Kit
Potentiometer
LCPS
User SPI
Connector LEDs Flash
OLED
Push-
Button
Reset
Push-
Button
PUB
Two I²C
Interfaces
5 V Wall
Jack
SRAM
USB
Interface
Fusion Push-Button Mixed Signal Mixed Signal
FPGA
Switch
Header
Test Pins
Ethernet
Interface
Ethernet
LEDs
Interface
Connector
RealView
Header
Push-
Button
Switch
Jumpers
for Internal
or External
Regulator
• Supports royalty-free, industry-
standard ARM Cortex-M1 or
8051s development
• Free one-year Libero IDE software
and Gold license with SoftConsole
for program and debug
• Low-cost programming
stick (LCPS)
• 5 V power supply and
international adapters
• Two USB cables
• Kit user’s guide, Libero IDE
tutorial and design examples
• PCB schematics, layout files
and BOM
• Board features
- 512 KB SRAM, 2 MB SPI flash
memory provided on board
- 10/100 Ethernet and I²C interfaces
- USB-to-UART connection for
HyperTerminal on a PC
- Built-in voltage, current and
temperature monitor and
voltage potentiometer
- Mixed signal interface
- Blue OLED 96x16 pixel display
- Dynamic reconfigurable analog
and flash memory
- FlashPro3 and RealView
debug interface
- RoHS compliant
Ordering Code
M1AFS-EMBEDDED-KIT
Supported Device
M1AFS1500-FGG484
Price
$ 250
24 www.microsemi.com/soc