English
Language : 

JANTX1N6075 Datasheet, PDF (2/3 Pages) Microsemi Corporation – VOIDLESS HERMETICALLY SEALED ULTRA FAST RECOVERY GLASS POWER RECTIFIERS
SCOTTSDALE DIVISION
1N6073 thru 1N6081
VOIDLESS HERMETICALLY SEALED
ULTRA FAST RECOVERY GLASS
POWER RECTIFIERS
ELECTRICAL CHARACTERISTICS @ 25oC unless otherwise specified
TYPE
WORKING
PEAK
REVERSE
VOLTAGE
MAXIMUM
FORWARD
VOLTAGE
(PULSED)
PULSED
TEST
CURRENT
VRWM
VOLTS
VF @ IF
VOLTS
AMPS
1N6073
50
2.04
9.4
1N6074
100
2.04
9.4
1N6075
150
2.04
9.4
1N6076
50
1.76
18.8
1N6077
100
1.76
18.8
1N6078
150
1.76
18.8
1N6079
50
1.50
37.7
1N6080
100
1.50
37.7
1N6081
150
1.50
37.7
*NOTE: IF = 0.5 A, IRM = 1.0 A, and IR(REC) = 0.25 A
AVERAGE
RECTIFIED
CURRENT IO
@ TL = 70ºC
AMPS
3.0
3.0
3.0
6.0
6.0
6.0
12.0
12.0
12.0
AVERAGE
RECTIFIED
CURRENT IO
@ TA = 55ºC
AMPS
0.85
0.85
0.85
1.3
1.3
1.3
2.0
2.0
2.0
MAXIMUM
REVERSE
CURRENT
IR @ VRWM
μA
1.0
1.0
1.0
5.0
5.0
5.0
10.0
10.0
10.0
MAXIMUM
REVERSE
RECOVERY
TIME*
trr
ns
30
30
30
30
30
30
30
30
30
MAXIMUM
SURGE
CURRENT
IFSM
AMPS
35
35
35
75
75
75
175
175
175
Symbol
VBR
VRWM
VF
IR
trr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating
temperature range.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and
temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when
changing from the forward direction to the reverse direction and a specified recovery decay point after a peak
reverse current is reached.
GRAPHS
FIGURE 1
Maximum power in watts vs lead temperature
For 1N6079, 1N6080 and 1N6081
FIGURE 2
Maximum power in watts vs lead temperature
for 1N6076, 1N6077 and 1N6078
FIGURE 3
Maximum power in watts vs lead temperature
for 1N6073, 1N6074 and 1N6075
Maximum lead temperature in oC (TL) at point “L” from body (for maximum operating junction temperature with equal two-lead conditions).
Copyright © 2007
10-03-2007 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2