JAN2N6547 Datasheet, PDF (2/2 Pages) Microsemi Corporation – NPN POWER SILICON TRANSISTOR

2N6546, 2N6547 JAN SERIES
ELECTRICAL CHARACTERISTICS (con’t)
Characteristics
ON CHARACTERISTICS ⁽³⁾
Symbol
Min. Max. Unit
Forward-Current Transfer Ratio
I_C = 1 Adc; V_CE = 2 Vdc
I_C = 5 Adc; V_CE = 2 Vdc
h_FE
15
12
60
I_C = 10 Adc; V_CE = 2 Vdc
Base-Emitter Saturated Voltage
I_B = 2.0 Adc; IC = 10 Adc
Collector-Emitter Saturated Voltage
V_BE(sat)
6
Vdc
1.6
I_B = 2.0 Adc; IC = 10 Adc
I_B = 3.0 Adc; IC = 15 Adc
V_CE(sat)
1.5
Vdc
5.0
DYNAMIC CHARACTERISTICS
Magnitude of Common-Emitter Small-Signal Short-Circuit
Forward Current Transfer Ratio
I_C = 0.5 Adc, V_CE = 10 Vdc, f = 1 MHz
Output Capacitance
V_CB = 10 Vdc, I_E = 0, 0.1 MHz ≤ f ≤ 1.0 MHz
h_fe
C_obo
6.0
30
500
pF
SWITCHING CHARACTERISTICS
Turn-On Time
V_CC = 250 Vdc; I_C = 10 Adc; I_B1 = I_B2 = 2 Adc
Turn-Off Time
V_CC = 250 Vdc; I_C = 10 Adc; I_B1 = I_B2 = 2 Adc
t_on
1.0
µs
t_off
4.7
µs
SAFE OPERATING AREA
DC Tests
T_C = +25⁰C; tp = 1 s; 1 cycle (See Figure 3 of MIL-PRF-19500/525)
Test 1
V_CE = 11.7 Vdc; I_C = 15 Adc
Test 2
V_CE = 20 Vdc; I_C = 8.75 Adc
Test 3
V_CE = 250 Vdc; I_C = 45 mAdc
2N6546
V_CE = 350 Vdc; I_C = 30 mAdc
2N6547
Unclamped Inductive lOAD
T_C = +25⁰C; duty cycle ≤ 10%; RS = 0.1 Ω; t_r = t_f ≤ 500 ηs (See Figure 4 of MIL-PRF-19500/525)
Test 1
Tp = 5 ms; (vary to obtain IC); RBB1 = 15 Ω; VBB1 = 38.5 Vdc; RBB2 = 50 Ω;
VBB2 = -4 Vdc; VCC = 20 Vdc; IC = 15 Adc; L = 10 µH
Test 2
Tp = 5 ms; (vary to obtain IC); RBB1 = 15 Ω; VBB1 = 38.5 Vdc; RBB2 = 50 Ω;
VBB2 = -4 Vdc; VCC = 20 Vdc; IC = 100 mAdc; L = 1 mH
Clamped Inductive Load
T_A = +25⁰C; duty cycle ≤ 5%; Tp = 1.5 ms; (vary to obtain IC); VCC = 20 Vdc; I_C = 8 Adc; L = 180 µH
(See Figure 5 of MIL-PRF-19500/525)
Clamped Voltage = 350 Vdc
2N6546
Clamped Voltage = 450 Vdc
2N6547
3.) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%.
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / [phone] / Fax: [phone]
120101
Page 2 of 2