1N5186US Datasheet, PDF (2/2 Pages) Microsemi Corporation – VOIDLESS-HERMETICALLY SEALED SURFACE MOUNT FAST RECOVERY GLASS RECTIFIERS

SCOTTSDALE DIVISION
1N5186US thru 1N5190US
VOIDLESS-HERMETICALLY SEALED
SURFACE MOUNT FAST RECOVERY
GLASS RECTIFIERS
Symbol
V_BR
V_RWM
V_F
I_R
t_rr
SYMBOLS & DEFINITIONS
Definition
Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating
temperature range.
Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and
temperature.
Reverse Recovery Time: The time interval between the instant the current passes through zero when
changing from the forward direction to the reverse direction and a specified decay point after a peak reverse
current occurs.
PACKAGE DIMENSIONS
NOTE: This Package Outline has also previously
been identified as “D-5B”
BL
BD
ECT
S
INCHES
MIN MAX
.205 .225
.137 .142
.019 .028
.003
---
mm
MIN MAX
5.21 5.72
3.48 3.61
0.48 0.711
0.08
---
PAD LAYOUT
INCHES
mm
A
0.288
7.32
B
0.070
1.78
C
0.155
3.94
Note: If mounting requires adhesive
separate from the solder, an additional
0.080 inch diameter contact may be
placed in the center between the pads
as an optional spot for cement.
Copyright  2004
12-10-2004 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, [phone], Fax: [phone]
Page 2