|
PD64001 Datasheet, PDF (1/9 Pages) Microsemi Corporation – 1-Port PoE Manager | |||
|
PD64001 1-Port PoE Manager Datasheet
Preliminary
Introduction ________________
The PD64001 is a single-port Power over Ethernet
PSE (Power Source Equipment) Manager. The PSE
Manager allows for the detection of IEEE 802.3af-
2003 and IEEE802.3at/D3.0 powered devices,
ensuring safe power feeding and monitoring of
Ethernet ports. With a minimum of external
components, the PD64001 integrates in a one-port or
two- port PoE-port switches and Midspans.
The PD64001 has several operating modes, allowing
it to be tailored to the customer application, be it a
Switch or a Midspan, IEEE802.af or
IEEE802.3at/D3.0-compliant, with 1-event or 2-
events classification, AC or DC disconnect and strict
resistor detection or legacy detection capabilities. It
operates in a total stand-alone mode, with no need
for user intervention.
The PD64001 supports 2-events classification and
operates at Iport_max currents of up to 720mA per
port, making it fully compliant with the
IEEE802.3at/D3.0
This datasheet includes a complete application note
and provides detailed information and circuitry design
guidelines for the implementation of a 1-port Power
over Ethernet (PoE) system, based on Microsemiâsâ¢
1-channel PoE device- the PD64001.
This document allows the designer to integrate PoE
capabilities, as specified in the IEEE802.3af standard
into an Ethernet switch, Midspan or a Router.
Applicable Documents__________
⦠IEEE802.3af-2003
⦠IEEE802.3at/D3.0
Pin Configuration _____________
Features_____________________
⦠IEEE 802.3af-2003-compliant
⦠IEEE802.3at/D3.0 compliant
⦠Supports Iport_max of 720mA
⦠Programmable solution, can be updated as the
IEEE802.3at standard evolves
⦠Accurate power measuring and extremely low
power dissipation
⦠BOM and software tailored for specific
application saving total solution cost
⦠Minimal power supply stress and EMI noises
⦠Legacy (pre-standard) PDâs detection
⦠1-port standalone PoE control
⦠1-event and 2-event classification supported
⦠External FET and sense resistor
⦠AC and DC disconnect
⦠Detection of the disconnection method by
assembled resistor
⦠Port On/Off Host interface
⦠Single operating voltage source
⦠Direct LED driving including IEEE802.3at
indication
⦠SOIC-20 package
⦠RoHS compliant
⦠-40oC to +85oC operating ambient temperature
Ordering Information__________
PART
PD64001
TEMP. RANGE PIN PACKAGE
-40°C to +85°C
SOIC-20
Evaluation board ordering number - PD-IM-73001
Copyright © 2008
Rev. 0.4 2008-05-08
Microsemi
Analog Mixed Signal Group
1 Hanagar st., P.O/ Box 7220 Hod Hasharon 45421, Israel Tel: +972-9-7755100 Fax: +972-9-7755111
page 1
|
▷ |