APTGF90A60T3AG Datasheet, PDF (1/5 Pages) Microsemi Corporation – Phase leg NPT IGBT Power Module Power Module

APTGF90A60T3AG
Phase leg
NPT IGBT Power Module
Power Module
29 30 31 32
13
4
3
26 27 28
R1
22 23 25
8
7
16 18 19 20
14
28 27 26 25
29
30
23 22
20 19 18
16
15
V_CES = 600V
I_C = 90A @ Tc = 100°C
Application
• Welding converters
• Switched Mode Power Supplies
• Uninterruptible Power Supplies
• Motor control
Features
• Non Punch Through (NPT) Fast IGBT
- Low voltage drop
- Low tail current
- Switching frequency up to 100 kHz
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- RBSOA and SCSOA rated
• Very low stray inductance
• Kelvin emitter for easy drive
• Internal thermistor for temperature monitoring
• High level of integration
• AlN substrate for improved thermal performance
31
32
234
78
14
13
10 11 12
Pins 29/30/31/32 must be shorted together
Pins 26/27/28/22/23/25 must be shorted together
to achieve a phase leg
Pins 16/18/19/20 must be shorted together
Benefits
• Direct mounting to heatsink (isolated package)
• Low junction to case thermal resistance
• Solderable terminals both for power and signal for
easy PCB mounting
• Low profile
• RoHS Compliant
Absolute maximum ratings
Symbol
Parameter
V_CES Collector - Emitter Breakdown Voltage
I_C Continuous Collector Current
I_CM
V_GE
P_D
RBSOA
Pulsed Collector Current
Gate – Emitter Voltage
Maximum Power Dissipation
Reverse Bias Safe Operating Area
Max ratings
Unit
600
V
T_C = 25°C
130
T_C = 100°C
90
A
T_C = 25°C
200
±20
V
T_C = 25°C
520
W
T_J = 150°C 200A @ 480V
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note
APT0502 on www.microsemi.com
www.microsemi.com
1–5