M25P16-VMF3TPB Datasheet, PDF (47/50 Pages) Micron Technology – Micron M25P80 Serial Flash Embedded Memory

Micron M25P80 Serial Flash Embedded Memory
Package Information
Figure 30: UFDFPN8 (MLP8) 4mm x 3mm
4.00 ±0.10
A
B
Datum A
0.80 ±0.10
1
2
3
4
8 x (0.60 ±0.05)
0.20 DIA TYP
2X
0.10 C
2X
0.10 C
1
2
Top View
// 0.10 C ^{0.55+-00..0150}
0.05 C
Seating Plane
0.127 MIN/ ^{0.02+-00..0023}
0.15 MAX
Side View
3.00 ±0.10
C
0.20 ±0.10
Datum B
See detail A
(See note 1)
8 x (0.30 ±0.05)
8
7
6
5
0.80 TYP
0.10 M C A B
0.05 M C
Bottom View
Datum A or B
0.60 ±0.05
0.80 TYP
Terminal Tip
0.40 TYP
Even Terminal/Side
Detail A
Notes:
1. The dimension 0.30 ±0.05 applies to the metallic terminal and is measured between
0.15mm and 0.30mm from the terminal tip. If the terminal has the optional radius on
the other end of the terminal, the dimensions should not be measured in that radius
area.
2. Maximum package warping is 0.05mm; maximum allowable burrs is 0.076mm in all di-
rections; the bilateral coplanarity zone applies to the exposed heat sink slug as well as
to the terminals.
3. Drawing is not to scale.
PDF: 09005aef84566560
m25p80.pdf - Rev. G 1/13 EN
47
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.