English
Language : 

MT9E001 Datasheet, PDF (1/97 Pages) Micron Technology – 1/2.5-Inch CMOS Digital Image Sensor
Micron Confidential and Proprietary
Preliminary‡
MT9E001: 1/2.5-Inch 8-Mp Digital Image Sensor
Features
1/2.5-Inch CMOS Digital Image Sensor
MT9E001
Refer to the latest MT9E001 data sheet on Micron’s Web site: www.mircon.com/imaging
Features
• DigitalClarity® CMOS imaging technology
• Superior low-light performance
• Low dark current
• Simple two-wire serial interface
• Auto black level calibration
• Support for external mechanical shutter
• Support for external LED or Xenon flash
• High frame rate preview mode with arbitrary
downsize scaling from maximum resolution
• Programmable controls: gain, frame size/rate,
exposure, left-right and top-bottom image reversal,
window size, and panning
• Data interface: parallel
• On-chip phase-locked loop (PLL)
• Bayer pattern down-size scaler
• Four channel shading correction (SC)
Applications
• Digital still cameras
• Cellular phones
Table 1: Key Performance Parameters
Parameter
Value
Optical format
1/2.5-inch (4:3)
Full resolution
3,264 x 2,448 pixels
Pixel size
1.75µm x 1.75µm
Chief ray angle
10.19 maximum
Color filter array
RGB Bayer pattern
Shutter type
Electronic rolling shutter
(ERS) with global reset
release (GRR)
Input clock frequency
6−48 MHz
Maximum data rate/master 96 Mbps
clock
Full
11 fps
Frame rate resolution
Video mode 30 fps
Analog
2.4−3.1V (2.8V nominal)
Supply
voltage
Digital
I/O
1.7−1.9V (1.8V nominal)
1.8 or 2.8V
PLL
2.4−3.1V (2.8V nominal)
ADC resolution
12-bit
Responsivity
0.3 V/lux-sec (at 550nm)
(preliminary)
Dynamic range
70dB (preliminary)
SNRMAX
38.9dB (preliminary)
Full
650mW (typical)
Power
resolution
consumption Video mode 594mW (typical)
Standby
45µW (typical, EXTCLK
disabled)
Operating temperature –30°C to +70°C (at junction)
Package
48-pin iLCC
Ordering Information
Table 2: Available Part Numbers
Part Number
MT9E001I12STC
Description
48-pin iLCC
PDF: 09005aef8210fa55/Source: 09005aef8210f91a
MT9E001__1.fm - Rev. C 10/06 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2006 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.