MT28F128J3 Datasheet, PDF (1/52 Pages) Micron Technology – Q-FLASHTM MEMORY

Q-FLASH^TM MEMORY
128Mb, 64Mb, 32Mb
Q-FLASH MEMORY
MT28F128J3^‡, MT28F640J3,
MT28F320J3^‡
FEATURES
• x8/x16 organization
• One hundred twenty-eight 128KB erase blocks
(128Mb)
Sixty-four 128KB erase blocks (64Mb)
Thirty-two 128KB erase blocks (32Mb)
• VCC, VCCQ, and VPEN voltages:
2.7V to 3.6V VCC operation
2.7V to 3.6V or 4.5V to 5.5V* VCCQ operation
2.7V to 3.6V, or 5V VPEN application programming
• Interface Asynchronous Page Mode Reads:
150ns/25ns read access time (128Mb)
120ns/25ns read access time (64Mb)
110ns/25ns read access time (32Mb)
• Enhanced data protection feature with VPEN = VSS
Flexible sector locking
Sector erase/program lockout during power
transition
• Security OTP block feature
Permanent block locking (Contact factory for
availability)
• Industry-standard pinout
• Inputs and outputs are fully TTL-compatible
• Common Flash Interface (CFI) and Scalable
Command Set
• Automatic write and erase algorithm
• 4.7µs-per-byte effective programming time using
write buffer
• 128-bit protection register
64-bit unique device identifier
64-bit user-programmable OTP cells
• 100,000 ERASE cycles per block
• Automatic suspend options:
Block Erase Suspend-to-Read
Block Erase Suspend-to-Program
Program Suspend-to-Read
NOTE: MT28F128J3, and MT28F320J3 are preliminary status.^‡
MT28F640J3 is production status.
OPTIONS
MARKING
• Timing
150ns (128Mb)
-15
120ns (64Mb)
-12
110ns (32Mb)
-11
• Operating Temperature Range
Commercial Temperature (0ºC to +85ºC) None
Extended Temperature (-40ºC to +85ºC)
ET
56-Pin TSOP Type I
64-Ball FBGA
• VCCQ Option*
2.7V–3.6V
4.5V–5.5V
• Packages
56-pin TSOP Type I
64-ball FBGA (1.0mm pitch)
None
F
RG
FS
Part Number Example:
MT28F640J3RG-12 ET
*Contact factory for availability of the MT28F320J3 and
MT28F640J3.
128Mb, 64Mb, 32Mb Q-Flash Memory
MT28F640J3_7.p65 – Rev. 6, Pub. 8/02
1
©2002, Micron Technology, Inc.
‡_{PRODUCTS AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE}
SUBJECT TO CHANGE BY MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON’S
PRODUCTION DATA SHEET SPECIFICATIONS.