M25PX64-VMF Datasheet, PDF (1/56 Pages) Micron Technology – Micron M25PX64 Serial Flash Embedded Memory

Micron M25PX64 Serial Flash Embedded Memory
Features
Micron M25PX64 Serial Flash Embedded
Memory
64Mb, Dual I/O, 4KB Subsector Erase, Serial Flash Memory
with 75 MHz SPI Bus Interface
Features
• SPI bus compatible serial interface
• 75MHz (maximum) clock frequency
• 2.7V to 3.6V single supply voltage
• Dual input/output commands resulting in an
equivalent clock frequency of 150MHz
– DUAL OUTPUT FAST READ command
– DUAL INPUT FAST PROGRAM command
• Continuous read of entire memory using FAST
READ or DUAL OUTPUT FAST READ command
• 64Mb Flash memory
– Uniform 4KB subsectors
– Uniform 64KB sectors
• Additional 64B user-lockable, one-time program-
mable (OTP) area
• Erase capability
– Subsector (4KB granularity)
– Sector (64KB granularity)
– Bulk erase (64Mb) in 68 s typical
• Write protections
– Software write protection: applicable to every
64KB sector (volatile lock bit)
– Hardware write protection: non-volatile bits BP0,
BP1, BP2 define protected area size
• Deep power down: 5µA typical
• Electronic signature
– JEDEC standard 2B signature (7117h)
– Unique ID code (UID) with 16B read-only space,
available upon request
• More than 100,000 write cycles per sector
• More than 20 years data retention
• Packages (RoHS compliant)
– VDFPN8 (ME) 8mm x 6mm (MLP8)
– VDFPN8 (MD) 8mm x 6mm (MLP8) with reduced
D2 dimension
– SO16 (MF) 300 mils width
– TBGA24 (ZM) 6mm x 8mm
• Automotive certified parts available
• This latest generation of this product line is availa-
ble in the N25Q device (see TN 12-13 for migration
guide)
PDF: 09005aef845665ac
m25px64.pdf - Rev. B 3/13 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.