M1500 Datasheet, PDF (9/9 Pages) GSI Group, Inc. – Mercury TM1500 Digital Output Encoder Systems Factory Set Resolution to 0.50μm

How to Order Mercury 1500 Encoder Systems
To specify your Mercury encoder with the desired scale, level of interpolation, maximum output frequency, cable length and software,
consult the chart below to create the correct part number for your order. Call MicroE Systems’ Rapid Customer Response team for
more information [508] 903-5000.
Example (Linear Encoder): M1510-S-8-L55-C1 Example (Rotary Encoder): M1510-S-40-R1910-HA
M15XX – Connector Type – Interpolation – Scale Model – Scale Mounting
M1510 = 1m cable
M1520 = 2m cable
M1550 = 5m cable
S = Standard
15 pin D-sub
H = Micro-
connector
4 = 4x
8 = 8x
20 = 20x
40 = 40x
Lxxx or Rxxxx
For linear scales:
T = Tape mounting
C1 = 3 scale clamps*
C2 = 10 scale clamps**
* 3 clamps for linear scales up to 130mm
** 10 clamps for linear scales 155mm or longer
All Specifications are subject to change. All data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
Hubs for Rotary Scales:
NH = Without Hub
HE = for R1206
HA = for R1910
HB = for R3213
HC = for R5725
HD = for R10851
How to Order SmartPrecision Alignment Tool
Example: Alignment Tool for Mercury 1500 encoder, 120 VAC = SSAT1500-H-120
SSAT1500 – Connector
–
Voltage
H = micro connector
for M1500H
S = 15-pin Std. D-sub connector for
M1500S
120 = 120 VAC, 60Hz US Std. 2-prong plug
220 = 220 VAC, 50Hz European Std. 2-prong plug
How to Order SmartPrecision Software
Optional for SSAT1500 Alignment Tool
SmartPrecision Software
SSWA-AT = SmartPrecision software on CD
All Specifications are subject to change. All
data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
MicroE Systems – World Headquarters: 125 Middlesex Turnpike • Bedford • MA 01730
DS-M1500 H&S Rev H © 2009 MicroE Systems www.microesys.com • [e-mail] • T. [781]-266-5700 • F. [781]-266-5112
Page 9 of 9