WRA-ZMD-20W Datasheet, PDF (1/3 Pages) Microdc power Technology Co., Ltd – 20W,WIDEINPUT, ISOLATED®ULATEDDUAL/SINGLEOUTPUTDC-DCCONVERTER

WRA-ZMD-20W＆WRB-ZMD -20W Series
20W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER
FEATURES
◆High power density in 1" x 2" metal package
◆Ultra wide 4 : 1 input range
◆Extended operating temperature range
–40℃ to +85℃ max.
◆No minimum load required
◆I/O-isolation 1500 VDC
◆Remote On/Off
◆Adjustable output voltage
◆Industry standard footprint
◆Shielded metal case with insulated baseplate
◆Optional heatsink
◆Lead free design - RoHS compliant
◆3-year product warranty
MODEL SELECTION
WRB^①24^②12^③Z^④M^⑤D^⑥-20W(1670)^⑦
①Product Series ②Input Voltage
③Output Voltage ④Wide (4:1) Input Range
⑤Metal Shield
⑥2" x 1"DIP Package Style
⑦Rated Power(Output current)
APPLICATIONS
The WRA-ZMD-20W ＆ WRB-ZMD-20W Series is a
family of high performance 20W DC/DC converter
modules featuring ultra wide 4:1 input voltage ranges in a
ultra compact 2“x1“ low profile package with
industry-standard footprint. A very high efficiency al-lows
an operating temperature range of –40°C to 85°C. Further
standard features include remote On/Off, output voltage
trimming,over voltage protection and short-circuit
protection.
Typical applications for these converters are battery
operated equipment and distributed power architectures
in communication and industrial electronics, everywhere
where isolated, tightly regulated voltages are required.
MICRODC reserves the copyright
SELECTION GUIDE
Order code
Input voltage
range
WRB2403ZMD-5500
WRB2405ZMD-20W
WRB2412ZMD-20W
WRB2415ZMD-20W
WRA2405ZMD-20W
WRA2412ZMD-20W
9 – 36 VDC
9 – 36 VDC
9 – 36 VDC
9 – 36 VDC
9 – 36 VDC
9 – 36 VDC
WRA2415ZMD-20W
WRB4803ZMD-5500
WRB4805ZMD-20W
WRB4812ZMD-20W
WRB4815ZMD-20W
WRA4805ZMD-20W
WRA4812ZMD-20W
WRA4815ZMD-20W
9 – 36 VDC
18 – 75 VDC
18 – 75 VDC
18 – 75 VDC
18 – 75 VDC
18 – 75 VDC
18 – 75 VDC
18 – 75 VDC
Output voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15VDC
± 5 VDC
± 12 VDC
± 15 VDC
Output
current max.
5500 mA
4000 mA
1670 mA
1330 mA
± 2000 mA
± 835 mA
± 665 mA
5500 mA
4000 mA
1670 mA
1330 mA
± 2000 mA
± 835 mA
± 665 mA
Efficiency typ.
85 %
88 %
86 %
86 %
88 %
87 %
87 %
85 %
88 %
87 %
87 %
89 %
88 %
88 %
Input Specifications
Input current at no load
Input current at full load
Surge voltage
(100 msec. max.)
Input voltage variation (dv/df)
Start-up voltage / under voltage
lockout
Conducted noise(input)
24 Vin models:
48 Vin models:
24 Vin models:
48 Vin models:
24 Vin models:
48 Vin models:
24 Vin models:
48 Vin models:
50 mA typ.
35 mA typ.
1000 mA typ.
500 mA typ.
50 V max.
100 V max.
5 V / ms, max.
(complies to ETS 300 132 part. 4.4)
9 VDC / 7.5 VDC typ.
18 VDC / 15 VDC typ.
EN 55022 level A, FCC part 15, level A with
external capacitor (see application note)
ESD (input)
Fast transient (input)
Surge (input)
EN 61000-4-2, perf. criteria B
EN 61000-4-4, perf. criteria B
EN 61000-4-5, perf. criteria B
General Specifications
Reliability, calculated MTBF
Isolation voltage (60 sec.)
Isolation capacity
Isolation resistance
Switching frequency (fixed)
Vibration
Remote On/Off
Safety standards
(MIL-HDBK-217F
ground benign)
– Input/Output
– Input/Output
– Input/Output
– On:
– Off:
– Off idle current:
>560000 h @ + 25 °C
1500 VDC
1500 pF max
>1000 M Ohm
400 kHz typ. (pulse width modulation PWM)
10-55Hz, 10G, 30 minutes along X,Y,Z
3.0 to 12 VDC or open circuit.
0 to 1.2 VDC or short circuit pin 2 and pin 6
2.5 mA typ.
UL 60950
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 3