TC4426M Datasheet, PDF (9/18 Pages) Microchip Technology – 1.5A Dual High-Speed Power MOSFET Drivers

TC4426M/TC4427M/TC4428M
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
8-Pin
CERDIP
Symbol
Description
1
NC No connection
2
IN A Input A
3
GND Ground
4
IN B Input B
5
OUT B Output B
6
V_DD Supply input
7
OUT A Output A
8
NC No connection
3.3 Output A & B (OUT A and OUT B)
MOSFET drivers OUT A & B are low-impedance,
CMOS push-pull style outputs. The pull-down and pull-
up devices are of equal strength, making the rise and
fall times equivalent.
3.4 Supply Input (V_DD)
The V_DD input is the bias supply for the MOSFET driver
and is rated for 4.5V to 18V with respect to the ground
pin. The V_DD input should be bypassed with local
ceramic capacitors. The value of these capacitors
should be chosen based on the capacitive load that is
being driven. A value of 1.0 µF is suggested.
3.1 Inputs A & B (IN A and IN B)
MOSFET drivers IN A & B are high-impedance, TTL/
CMOS-compatible inputs. These inputs also have
300 mV of hysteresis between the high and low
thresholds that prevents output glitching even when the
rise and fall time of the input signal is very slow.
3.2 Ground (GND)
GND is the device return pin. The ground pin(s) should
have a low-impedance connection to the bias supply
source return. High peak currents will flow out of the
ground pin(s) when the capacitive load is being
discharged.
© 2005 Microchip Technology Inc.
DS21938A-page 9