SST26VF064B_15 Datasheet, PDF (77/85 Pages) Microchip Technology – 2.5V/3.0V 64 Mbit Serial Quad I/O (SQI) Flash Memory

SST26VF064B / SST26VF064BA
TABLE 11-1: SERIAL FLASH DISCOVERABLE PARAMETER (SFDP) (CONTINUED) (12 OF 16)
Address Bit Address
A16
A17
206H
A18
207H
208H
209H
20AH
20BH
20CH
20DH
20EH
20FH
A19
A23:A20
A31:A24
A7:A0
A15:A8
A23:A16
A31:A24
A7:A0
A15:A8
A23:A16
A31:A24
210H
A7:A0
211H
212H
213H
214H
215H
216H
217H
A15:A8
A23:A16
A31:A24
A7:A0
A15:A8
A23:A16
A31:A24
218H
219H
A23:A16
A31:A24
Data
FDH
FFH
30H
F2H
60H
F3H
32H
FFH
0AH
12H
23H
46H
FFH
0FH
19H
32H
0FH
19H
19H
FFH
Comments
OTP Capable (Security ID) Supported
0: not supported
1: supported
Supports Block Group Protect
0: not supported
1: supported
Supports Independent Block Protect
0: not supported
1: supported
Supports Independent non Volatile Lock (Block or Sector becomes
OTP)
0: not supported
1: supported
Reserved. Bits default to all 1’s.
Reserved. Bits default to all 1’s.
V_DD Minimum Supply Voltage
2.3V (F230H)
V_DD Maximum Supply Voltage
3.6V (F360H)
Typical time out for Byte-Program: 50 µs
Typical time out for Byte Program is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
Reserved. Bits default to all 1’s.
Typical time out for page program: 1.0ms (xxH*(0.1ms)
Typical time out for Sector-Erase/Block-Erase: 18 ms
Typical time out for Sector/Block-Erase is in ms. Represented by conversion
of the actual time from the decimal to hexadecimal number.
Typical time out for Chip-Erase: 35 ms
Typical time out for Chip-Erase is in ms. Represented by conversion of
the actual time from the decimal to hexadecimal number.
Max. time out for Byte-Program: 70 µs
Typical time out for Byte Program is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
Reserved. Bits default to all 1’s.
Max time out for Page-Program: 1.5ms.
Typical time out for Page Program in xxH * (0.1ms) ms
Max. time out for Sector Erase/Block Erase: 25ms.
Max time out for Sector/Block Erase in ms
Max. time out for Chip Erase: 50ms.
Max time out for Chip Erase in ms.
Max. time out for Program Security ID: 1.5 ms
Max time out for Program Security ID in xxH*(0.1ms) ms
Max. time out for Write-Protection Enable Latency: 25 ms
Max time out for Write-Protection Enable Latency is in ms. Represented by con-
version of the actual time from the decimal to hexadecimal number.
Max. time Write-Suspend Latency: 25 µs
Max time out for Write-Suspend Latency is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
Max. time to Deep Power-Down
0FFH = Reserved
 2015 Microchip Technology Inc.
DS20005119G-page 77