MCP39F511 Datasheet, PDF (40/62 Pages) Microchip Technology – Power-Monitoring IC with Calculation and Energy Accumulation

MCP39F511
REGISTER 7-1: EVENT CONFIGURATION REGISTER
U-0
U-0
—
—
bit 31
U-0
R/W-0
R/W-0
—
OVER-
OVER-
TEMP_PIN2¹ TEMP_PIN1¹
R/W-0
OVERTEMP_CL^1,2
R/W-0
OVERTEMP_LA¹
R/W-0
OVERTEMP_T-
ST¹
bit 24
R/W-0
OVER-
POW_PIN2
bit 23
U-0
—
bit 15
R/W-0
OVER-
CUR_PIN2
R/W-0
VSURGE_PIN
2
R/W-0
VSAG_PIN2
R/W-0
OVER-
POW_PIN1
R/W-0
OVERCUR_PIN1
U-0
U-0
U-0
R/W-0
R/W-0
—
—
—
OVERCUR_CL² OVERPOW_CL²
R/W-0
VSURGE_PIN1
R/W-0
VSUR_CL²
R/W-0
VSAG_PIN1
bit 16
R/W-0
VSAG_CL²
bit 8
R/W-0
VSUR_LA
bit 7
R/W-0
VSAG_LA
R/W-0
OVER-
POW_LA
R/W-0
OVERCUR_LA
R/W-0
VSUR_TST
R/W-0
VSAG_TST
R/W-0
R/W-0
OVERPOW_TST OVERCUR_TST
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bits 31-29
bit 28
bit 27
bit 26
bit 25
bit 24
bit 23
bit 22
bit 21
bit 20
Unimplemented: Read as ‘0’
OVERTEMP_PIN2: Event pin 2 operation for the Overtemperature event (Note 1)
1 = Event mapped to Event2 pin only
0 = Event not mapped to a pin (Default)
OVERTEMP_PIN1: Event pin 1 operation for the Overtemperature event (Note 1)
1 = Event mapped to Event1 pin only
0 = Event not mapped to a pin (Default)
OVERTEMP_CL: Reset or clear bit for the Overtemperature event (Notes 1, 2)
1 = Event is cleared
0 = Event is not cleared (Default)
OVERTEMP_LA: Latching control of the Overtemperature event (Note 1)
1 = Event is latched and needs to be cleared to be reset
0 = Event does not latch (Default)
OVERTEMP_TST: Test control of the Overtemperature event (Note 1)
1 = Simulated event is turned on
0 = Simulated event is turned off (Default)
OVERPOW_PIN2: Event pin 2 operation for the Overpower event
1 = Event mapped to Event2 pin only
0 = Event not mapped to a pin (Default)
OVERCUR_PIN2: Event pin 2 operation for the Overcurrent event
1 = Event mapped to Event2 pin only
0 = Event not mapped to a pin (Default)
VSURGE_PIN2: Event pin 2 operation for the Voltage Surge event
1 = Event mapped to Event2 pin only
0 = Event not mapped to a pin (Default)
VSAG_PIN2: Event pin 2 operation for the Voltage Sag event
1 = Event mapped to Event2 pin only
0 = Event not mapped to a pin (Default)
DS20005393B-page 40
 2015 Microchip Technology Inc.