DSPIC33FJ32GP302_11 Datasheet, PDF (378/412 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
31.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04,
and dsPIC33FJ128GPX02/X04 AC characteristics and
timing parameters for high temperature devices.
However, all AC timing specifications in this section are
the same as those in Section 30.2 “AC
Characteristics and Timing Parameters”, with the
exception of the parameters listed in this section.
Parameters in this section begin with an H, which
denotes High temperature. For example, parameter
OS53 in Section 30.2 “AC Characteristics and
Timing Parameters” is the Industrial and Extended
temperature equivalent of HOS53.
TABLE 31-8: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+150°C for High Temperature
Operating voltage VDD range as described in Table 31-1.
FIGURE 31-1:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSC2
VDD/2
Load Condition 2 – for OSC2
RL
Pin
CL
VSS
Pin
CL
RL = 464Ω
CL = 50 pF for all pins except OSC2
VSS
15 pF for OSC2 output
TABLE 31-9: PLL CLOCK TIMING SPECIFICATIONS
AC
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
CHARACTERISTICS ^{Operating temperature -40°C ≤TA ≤+150°C for High Temperature}
Param
No.
HOS53
Note 1:
Symbol
Characteristic
DCLK
CLKO Stability (Jitter)⁽¹⁾
Min Typ Max Units
-5
0.5
5
%
These parameters are characterized, but are not tested in manufacturing.
Conditions
Measured over 100 ms
period
DS70292E-page 378
© 2011 Microchip Technology Inc.