|
PIC32MX440F512H-80I Datasheet, PDF (252/646 Pages) Microchip Technology – 64/100-Pin General Purpose and USB 32-Bit Flash Microcontrollers | |||
|
◁ |
PIC32MX3XX/4XX
REGISTER 11-1: U1OTGIR: USB OTG INTERRUPT FLAG REGISTER
r-x
r-x
r-x
r-x
r-x
r-x
r-x
â
â
â
â
â
â
â
bit 31
r-x
â
bit 24
r-x
r-x
r-x
r-x
r-x
r-x
r-x
r-x
â
â
â
â
â
â
â
â
bit 23
bit 16
r-x
r-x
r-x
r-x
r-x
r-x
r-x
r-x
â
â
â
â
â
â
â
â
bit 15
bit 8
R/W/K-0
R/W/K-0
R/W/K-0
R/W/K-0
R/W/K-0
R/W/K-0
r-x
R/W/K-0
IDIF
T1MSECIF LSTATEIF
ACTVIF
SESVDIF SESENDIF
â
VBUSVDIF
bit 7
bit 0
Legend:
R = Readable bit
U = Unimplemented bit
W = Writable bit
K = Write â1â to clear
P = Programmable bit
r = Reserved bit
-n = Bit Value at POR: (â0â, â1â, x = unknown)
bit 31-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
Reserved: Write â0â; ignore read
IDIF: ID State Change Indicator bit
Write a â1â to this bit to clear the interrupt.
1 = Change in ID state detected
0 = No change in ID state detected
T1MSECIF: 1 Millisecond Timer bit
Write a â1â to this bit to clear the interrupt.
1 = 1 millisecond timer has expired
0 = 1 millisecond timer has not expired
LSTATEIF: Line State Stable Indicator bit
Write a â1â to this bit to clear the interrupt.
1 = USB line state has been stable for 1 ms, but different from last time
0 = USB line state has not been stable for 1 ms
ACTVIF: Bus Activity Indicator bit
Write a â1â to this bit to clear the interrupt.
1 = Activity on the D+, D-, ID, or VBUS pins has caused the device to wake-up
0 = Activity has not been detected
SESVDIF: Session Valid Change Indicator bit
Write a â1â to this bit to clear the interrupt.
1 = VBUS voltage has dropped below the session end level
0 = VBUS voltage has not dropped below the session end level
SESENDIF: B-Device VBUS Change Indicator bit
Write a â1â to this bit to clear the interrupt.
1 = A change on the session end input was detected
0 = No change on the session end input was detected
Reserved: Write â0â; ignore read
DS61143E-page 250
Preliminary
© 2008 Microchip Technology Inc.
|
▷ |