MRF24WN0MA Datasheet, PDF (25/36 Pages) Microchip Technology – 2.4 GHz IEEE 802.11b/g/n Wireless Module

4.5.1
EXTERNAL ANTENNA
REQUIREMENTS
The compliance testing listed in Table 4-1 was per-
formed using the antenna types listed in Table 3-1.
4.6 Japan
The MRF24WN0MA/MB module has received type
certification and is labeled with its own technical confor-
mity mark and certification number as required to con-
form to the technical standards regulated by the
Ministry of Internal Affairs and Communications (MIC)
of Japan pursuant to the Radio Act of Japan.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required:
• If the host product is subject to electrical appli-
ance safety (for example, powered from an AC
mains), the host product may require Product
Safety Electrical Appliance and Material (PSE)
testing. The integrator should contact their confor-
mance laboratory to determine if this testing is
required.
• There is an voluntary Electromagnetic Compatibil-
ity (EMC) test for the host product administered
by VCCI: http://www.vcci.jp/vcci_e/index.html
4.6.1
LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
MRF24WN0MA/MB module must follow Japan
marking requirements. The integrator of the module
should refer to the labeling requirements for Japan
available at the Ministry of Internal Affairs and
Communications (MIC) website.
The MRF24WN0MA/MB module is labeled with its own
technical conformity mark and certification number.
The final product in which this module is being used
must have a label referring to the type certified module
inside:
Contains transmitter module with certificate number:
Pending
MRF24WN0MA/MB
4.6.3
4.6.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses
(ARIB): http://www.arib.or.jp/english/
4.7 Korea
The MRF24WN0MA/MB module has received certifica-
tion of conformity in accordance with the Radio Waves
Act. Integration of this module into a final product does
not require additional radio certification provided instal-
lation instructions are followed and no modifications of
the module are allowed.
4.7.1
LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
MRF24WN0MA/MB module must follow KC marking
requirements. The integrator of the module should refer
to the labeling requirements for Korea available on the
Korea Communications Commission (KCC) website.
The MRF24WN0MA/MB module is labeled with its own
KC mark. The final product requires the KC mark and
certificate number of the module:
Pending
MSIP-CRI-029-RN4020
4.7.2
EXTERNAL ANTENNA
REQUIREMENTS
The Korea compliance testing was performed using
the antenna types listed in Table 3-1.
4.7.3 HELPFUL WEB SITES
Korea Communications Commission (KCC):
http://www.kcc.go.kr
National Radio Research Agency (RRA):
http://rra.go.kr
4.6.2
EXTERNAL ANTENNA
REQUIREMENTS
The compliance testing was performed using the
antenna types listed in Table 3-1.
 2015 Microchip Technology Inc.
Advance Information
DS50002410A-page 25