PIC24HJ64GP206A-I Datasheet, PDF (245/304 Pages) Microchip Technology – High-Performance,16-bit Microcontrollers

PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VIL
Input Low Voltage
DI10
I/O pins
VSS
— 0.2 VDD V
DI15
MCLR
VSS
— 0.2 VDD V
DI16
DI18
DI19
I/O Pins with OSC1 or SOSCI VSS
I/O Pins with I²C
VSS
I/O Pins with I²C
VSS
— 0.2 VDD V
— 0.3 VDD V SMbus disabled
— 0.2 VDD V SMbus enabled
VIH
DI20
Input High Voltage
I/O Pins Not 5V Tolerant⁽⁴⁾ 0.7 VDD —
VDD
V
I/O Pins 5V Tolerant⁽⁴⁾
0.7 VDD —
5.5
V
ICNPU CNx Pull-up Current
DI30
IIL
DI50
DI51
DI51a
DI51b
DI51c
Input Leakage Current^(2,3)
I/O Pins 5V Tolerant⁽⁴⁾
I/O Pins Not 5V Tolerant⁽⁴⁾
I/O Pins Not 5V Tolerant⁽⁴⁾
I/O Pins Not 5V Tolerant⁽⁴⁾
I/O Pins Not 5V Tolerant⁽⁴⁾
50
250 400
A VDD = 3.3V, VPIN = VSS
—
—
±2
A VSS  VPIN  VDD,
Pin at high-impedance
—
—
±1
A VSS  VPIN  VDD,
Pin at high-impedance,
-40°C  TA  +85°C
—
—
±2
A Shared with external reference
pins, -40°C  TA  +85°C
—
— ±3.5 A VSS  VPIN  VDD, Pin at
high-impedance,
-40°C  TA  +125°C
—
—
±8
A Analog pins shared with
external reference pins,
-40°C  TA  +125°C
DI55
MCLR
—
—
±2
A VSS VPIN VDD
DI56
OSC1
—
—
±2
A VSS VPIN VDD,
XT and HS modes
Note 1:
2:
3:
4:
Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
Negative current is defined as current sourced by the pin.
See “Pin Diagrams (Continued)” for a list of 5V tolerant pins.
 2009 Microchip Technology Inc.
Preliminary
DS70592B-page 245