HCS515_11 Datasheet, PDF (23/38 Pages) Microchip Technology – KEELOQ® Code Hopping Decoder stand-alone decoder

HCS515
9.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings^†
Ambient temperature under bias............................................................................................................ -40°C to +125°C
Storage temperature .............................................................................................................................. -65 °C to +150°C
Voltage on any pin with respect to VSS (except VDD)......................................................................... -0.6V to VDD +0.6V
Voltage on VDD with respect to Vss ..................................................................................................................0 to +7.0V
Total power dissipation (Note) .............................................................................................................................700 mW
Maximum current out of VSS pin ...........................................................................................................................200 mA
Maximum current into VDD pin ..............................................................................................................................150 mA
Input clamp current, IIK (VI < 0 or VI > VDD) .........................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO >VDD) ..................................................................................................± 20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................25 mA
Note: Power dissipation is calculated as follows: PDIS = VDD x {IDD - ∑IOH} + ∑{(VDD–VOH) x IOH} + ∑(VOL x IOL)
† _{NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the}
device. This is a stress rating only and functional operation of the device at those or any other condi-
tions above those indicated in the operation listings of this specification is not implied. Exposure to
maximum rating conditions for extended periods may affect device reliability.
© 2011 Microchip Technology Inc.
DS40183E-page 23