TC1027 Datasheet, PDF(2/18 Page) TelCom Semiconductor, Inc – LINEAR BUILDING BLOCK - QUAD LOW POWER COMPARATOR AND VOLTAGE REFERENCE

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

TC1027 Datasheet, PDF (2/18 Pages) TelCom Semiconductor, Inc – LINEAR BUILDING BLOCK - QUAD LOW POWER COMPARATOR AND VOLTAGE REFERENCE

◁

TC1027

1.0 ELECTRICAL

CHARACTERISTICS

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage ......................................................6.0V

Voltage on Any Pin .......... (VSS â 0.3V) to (VDD + 0.3V)

Junction Temperature....................................... +150Â°C

Operating Temperature Range............. -40Â°C to +85Â°C

Storage Temperature Range .............. -55Â°C to +150Â°C

*Stresses above those listed under "Absolute Maximum

Ratings" may cause permanent damage to the device. These

are stress ratings only and functional operation of the device

at these or any other conditions above those indicated in the

operation sections of the specifications is not implied.

Exposure to Absolute Maximum Rating conditions for

extended periods may affect device reliability.

TC1027 ELECTRICAL SPECIFICATIONS

Electrical Characteristics: Typical values apply at 25Â°C and VDD = 3.0V. Minimum and maximum values apply for TA = -40Â° to

+85Â°C, and VDD = 1.8V to 5.5V, unless otherwise specified.

Symbol

Parameter

Min

Typ

Max

Units

Test Conditions

VDD

Supply Voltage

1.8

Supply Current

Comparator

VICMR

VOS

Common Mode Input Voltage Range VSS â 0.2

Input Offset Voltage

-5

VOH

VOL

CMRR

Input Bias Current

Output High Voltage

Output Low Voltage

Common Mode Rejection Ratio

VDD â 0.3

PSRR

Power Supply Rejection Ratio

ISRC

Output Source Current

ISINK

Output Sink Current

tPD1

Response Time

tPD2

Response Time

Voltage Reference

VREF

IREF(SOURCE)

IREF(SINK)

CL(REF)

EVREF

eVREF

Reference Voltage

Source Current

Sink Current

Load Capacitance

Noise Voltage

Noise Voltage Density

1.176

1.200

1.0

5.5

ÂµA All outputs unloaded

VDD + 0.2

Â±100

0.3

Âµsec

VDD = 3V, VCM = 1.5V, TA = 25Â°C

TA = -40Â°C to 85Â°C

TA = 25Â°C, IN+,IN- = VDD to VSS

RL = 10kâ¦ to VSS

RL = 10kâ¦ to VDD

TA = 25Â°C, VDD = 5V

VCM = VDD to VSS

TA = 25Â°C, VCM = 1.2V

VDD = 1.8V to 5V

IN+ = VDD, IN- = VSS,

Output Shorted to VSS

VDD = 1.8V

IN+ = VSS, IN- = VDD,

Output Shorted to VDD

VDD = 1.8V

100mV Overdrive, CL = 100pF

10mV Overdrive, CL = 100pF

1.224

100

ÂµA

ÂµVRMS

ÂµV/âHz

100Hz to 100kHz

1kHz

DS21284B-page 2

▷