DSPIC30F5015_11 Datasheet, PDF (199/234 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC30F5015/5016
FIGURE 24-12: MOTOR CONTROL PWM MODULE FAULT TIMING CHARACTERISTICS
FLTA/B
PWMx
MP30
MP20
FIGURE 24-13:
MOTOR CONTROL PWM MODULE TIMING CHARACTERISTICS
MP11 MP10
PWMx
Note: Refer to Figure 24-2 for load conditions.
TABLE 24-30: MOTOR CONTROL PWM MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristic⁽¹⁾
Min Typ⁽²⁾ Max Units
Conditions
MP10
MP11
MP20
TFPWM
TRPWM
TFD
PWM Output Fall Time
PWM Output Rise Time
Fault Input ↓ to PWM
I/O Change
—
—
—
ns ^{See parameter DO32}
—
—
—
ns See parameter DO31
—
—
50
ns
—
MP30 TFH
Minimum Pulse Width
50
—
—
ns
—
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
© 2011 Microchip Technology Inc.
DS70149E-page 199