DSPIC30F2020-30I Datasheet, PDF (16/286 Pages) Microchip Technology – 28/44-Pin High-Performance Switch Mode Power Supply

dsPIC30F1010/202X
Table 1-2 provides a brief description of device I/O
pinouts for the dsPIC30F2020 and the functions that
may be multiplexed to a port pin. Multiple functions may
exist on one port pin. When multiplexing occurs, the
peripheral module’s functional requirements may force
an override of the data direction of the port pin.
TABLE 1-2: PINOUT I/O DESCRIPTIONS FOR dsPIC30F2020
Pin Name
Pin
Type
Buffer
Type
Description
AN0-AN7
AVDD
AVSS
CLKI
CLKO
EMUD
EMUC
EMUD1
EMUC1
EMUD2
EMUC2
IC1
INT0
INT1
INT2
SFLT1
SFLT2
SFLT3
PWM1L
PWM1H
PWM2L
PWM2H
PWM3L
PWM3H
PWM4L
PWM4H
I
Analog Analog input channels.
P
P
Positive supply for analog module.
P
P
Ground reference for analog module.
I ST/CMOS External clock source input. Always associated with OSC1 pin function.
O
—
Oscillator crystal output. Connects to crystal or resonator in Crystal
Oscillator mode. Optionally functions as CLKO in RC and EC modes. Always
associated with OSC2 pin function.
I/O
ST ICD Primary Communication Channel data input/output pin.
I/O
ST ICD Primary Communication Channel clock input/output pin.
I/O
ST ICD Secondary Communication Channel data input/output pin.
I/O
ST ICD Secondary Communication Channel clock input/output pin.
I/O
ST ICD Tertiary Communication Channel data input/output pin.
I/O
ST ICD Tertiary Communication Channel clock input/output pin.
I
ST Capture input.
I
ST External interrupt 0
I
ST External interrupt 1
I
ST External interrupt 2
I
ST Shared Fault Pin 1
I
ST Shared Fault Pin 2
I
ST Shared Fault Pin 3
O
—
PWM 1 Low output
O
—
PWM 1 High output
O
—
PWM 2 Low output
O
—
PWM 2 High output
O
—
PWM 3 Low output
O
—
PWM 3 High output
O
—
PWM 4 Low output
O
—
PWM 4 High output
MCLR
OC1-OC2
OCFLTA
OSC1
OSC2
PGD
PGC
PGD1
PGC1
PGD2
PGC2
Legend: CMOS
ST
I
I/P
ST Master Clear (Reset) input or programming voltage input. This pin is an
active low Reset to the device.
O
—
Compare outputs.
I
Output Compare Fault pin
I
CMOS Oscillator crystal input.
I/O
—
Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator
mode. Optionally functions as CLKO in FRC and EC modes.
I/O
ST In-Circuit Serial Programming™ data input/output pin.
I
ST In-Circuit Serial Programming clock input pin.
I/O
ST In-Circuit Serial Programming data input/output pin 1.
I
ST In-Circuit Serial Programming clock input pin 1.
I/O
ST In-Circuit Serial Programming data input/output pin 2.
I
ST In-Circuit Serial Programming clock input pin 2.
= CMOS compatible input or output
= Schmitt Trigger input with CMOS levels
= Input
Analog =
O
=
P
=
Analog input
Output
Power
DS70178C-page 14
Preliminary
© 2006 Microchip Technology Inc.