DSPIC30F5011-30IPT Datasheet, PDF (148/229 Pages) Microchip Technology – High-Performance, 16-Bit Digital Signal Controllers

dsPIC30F6011/6012/6013/6014
TABLE 20-1: OSCILLATOR OPERATING MODES
Oscillator Mode
Description
XTL
200 kHz-4 MHz crystal on OSC1:OSC2.
XT
4 MHz-10 MHz crystal on OSC1:OSC2.
XT w/PLL 4x
4 MHz-10 MHz crystal on OSC1:OSC2, 4x PLL enabled.
XT w/PLL 8x
XT w/PLL 16x
LP
4 MHz-10 MHz crystal on OSC1:OSC2, 8x PLL enabled.
4 MHz-10 MHz crystal on OSC1:OSC2, 16x PLL enabled⁽¹⁾.
32 kHz crystal on SOSCO:SOSCI⁽²⁾.
HS
10 MHz-25 MHz crystal.
EC
External clock input (0-40 MHz).
ECIO
EC w/PLL 4x
EC w/PLL 8x
EC w/PLL 16x
ERC
ERCIO
External clock input (0-40 MHz), OSC2 pin is I/O.
External clock input (4-10 MHz), OSC2 pin is I/O, 4x PLL enabled⁽¹⁾.
External clock input (4-10 MHz), OSC2 pin is I/O, 8x PLL enabled⁽¹⁾.
External clock input (4-7.5 MHz), OSC2 pin is I/O, 16x PLL enabled⁽¹⁾.
External RC oscillator, OSC2 pin is FOSC/4 output⁽³⁾.
External RC oscillator, OSC2 pin is I/O⁽³⁾.
FRC
7.37 MHz internal RC oscillator.
LPRC
512 kHz internal RC oscillator.
Note 1: dsPIC30F maximum operating frequency of 120 MHz must be met.
2: LP oscillator can be conveniently shared as system clock, as well as real-time clock for Timer1.
3: Requires external R and C. Frequency operation up to 4 MHz.
DS70117F-page 146
© 2006 Microchip Technology Inc.