DSPIC30F6010 Datasheet, PDF (138/218 Pages) Microchip Technology – High-Performance Digital Signal Controllers

dsPIC30F6010
TABLE 21-1: OSCILLATOR OPERATING MODES
Oscillator Mode
Description
XTL
200 kHz-4 MHz crystal on OSC1:OSC2.
XT
4 MHz-10 MHz crystal on OSC1:OSC2.
XT w/ PLL 4x
4 MHz-10 MHz crystal on OSC1:OSC2. 4x PLL enabled.
XT w/ PLL 8x
XT w/ PLL 16x
LP
4 MHz-10 MHz crystal on OSC1:OSC2. 8x PLL enabled.
4 MHz-10 MHz crystal on OSC1:OSC2. 16x PLL enabled⁽¹⁾.
32 kHz crystal on SOSCO:SOSCI⁽²⁾.
HS
10 MHz-25 MHz crystal.
EC
External clock input (0-40 MHz).
ECIO
EC w/ PLL 4x
EC w/ PLL 8x
EC w/ PLL 16x
ERC
ERCIO
External clock input (0-40 MHz). OSC2 pin is I/O.
External clock input (0-40 MHz). OSC2 pin is I/O. 4x PLL enabled⁽¹⁾.
External clock input (0-40 MHz). OSC2 pin is I/O. 8x PLL enabled⁽¹⁾.
External clock input (0-40 MHz). OSC2 pin is I/O. 16x PLL enabled⁽¹⁾.
External RC oscillator. OSC2 pin is FOSC/4 output⁽³⁾.
External RC oscillator. OSC2 pin is I/O⁽³⁾.
FRC
8 MHz internal RC Oscillator.
LPRC
512 kHz internal RC Oscillator.
Note 1: dsPIC30F maximum operating frequency of 120 MHz must be met.
2: LP oscillator can be conveniently shared as system clock, as well as real-time clock for Timer1.
3: Requires external R and C. Frequency operation up to 4 MHz.
DS70119D-page 136
Preliminary
 2004 Microchip Technology Inc.