|
USB84604 Datasheet, PDF (1/61 Pages) Microchip Technology – USB 2.0 HSIC Hi-Speed 4-Port Controller Hub | |||
|
USB84604
USB 2.0 HSIC Hi-Speed 4-Port Controller Hub
Highlights
⢠Controller Hub IC with 4 downstream ports
⢠High-Speed Inter-Chip (HSIC) support
- Upstream port selectable between HSIC or
USB 2.0
⢠USB-IF Battery Charger revision 1.2 support on
downstream ports (DCP, CDP, SDP)
⢠Battery charging support for Apple® devices
⢠FlexConnect: Downstream port 1 able to swap
with upstream port, allowing master capable
devices to control other devices on the hub
⢠USB to I2CTM/SPI/GPIO/UART bridge support
through the Hub Controller
⢠Device functionality and configuration for USB
host/slave swapping is also provided by external
SPI Flash
⢠USB Link Power Management (LPM) support
⢠SUSPEND pin for remote wakeup indication to
host
⢠Start Of Frame (SOF) synchronized clock output
pin
⢠Vendor Specific Messaging (VSM) support
⢠Enhanced OEM configuration options available
through OTP or SMBus Slave Port
⢠Flexible power rail support
- VBUS or VBAT only operation
- 3.3 V only operation
- VBAT + 1.8 V operation
- 3.3 V + 1.8 V operation
⢠48-pin (7x7 mm) QFN RoHS compliant package
Target Applications
⢠Automotive head unit
⢠Automotive breakout box
⢠Navigation devices
⢠Automotive consumer connectivity ports
⢠Smart phones requiring host and device modes
⢠Rear seat infotainment access
Key Benefits
⢠MultiTRAKTM
- Dedicated Transaction Translator per port
⢠PortMap
- Configurable port mapping and disable
sequencing
⢠PortSwap
- Configurable differential intra-pair signal
swapping
⢠PHYBoostTM
- Programmable USB transceiver drive
strength for recovering signal integrity
⢠VariSenseTM
- Programmable USB receiver sensitivity
⢠Low power operation
⢠Full Power Management with individual or ganged
power control of each downstream port
⢠Built-in Self-Powered or Bus-Powered internal
default settings provide flexibility in the quantity of
USB expansion ports utilized without redesign
⢠Supports OTP configurable flash
⢠Fully integrated USB termination and Pull-up/Pull-
down resistors
⢠On-chip Power On Reset (POR)
⢠Internal 3.3 V and 1.2 V voltage regulators
⢠On Board 24 MHz Crystal Driver, Resonator, or
External 24 MHz clock input
⢠Temperature range: -40 ºC to 85 ºC
ï£ 2014-2016 Microchip Technology Inc.
DS60001295C-page 1
|
▷ |