|
USB3250 Datasheet, PDF (1/46 Pages) Microchip Technology – Hi-Speed USB Device Transceiver with UTMI Interface | |||
|
USB3250
Hi-Speed USB Device Transceiver with UTMI Interface
Highlights
⢠USB-IF "Hi-Speed" certified to USB 2.0 electrical
specification
⢠Interface compliant with the UTMI specification
(60MHz 8-bit unidirectional interface or 30MHz
16-bit bidirectional interface)
⢠Supports 480Mbps High Speed (HS) and 12Mbps
Full Speed (FS) serial data transmission rates
⢠Integrated 45ï and 1.5kï termination resistors
reduce external component count
⢠Internal short circuit protection of DP and DM
lines
⢠On-chip oscillator operates with low cost 12MHz
crystal
⢠Robust and low power digital clock and data
recovery circuit
⢠SYNC and EOP generation on transmit packets
and detection on receive packets
⢠NRZI encoding and decoding
⢠Bit stuffing and unstuffing with error detection
⢠Supports the USB suspend state, HS detection,
HS Chirp, Reset and Resume
⢠Support for all test modes defined in the USB 2.0
specification
⢠Draws 72mA (185mW) maximum current con-
sumption in HS mode - ideal for bus powered
functions
⢠On-die decoupling capacitance and isolation for
immunity to digital switching noise
⢠Available in a 56-pin VQFN package
⢠Full industrial operating temperature range from
-40oC to +85oC (ambient)
Applications
The Universal Serial Bus (USB) is the preferred inter-
face to connect Hi-Speed PC peripherals.
⢠Digital Still and Video Cameras
⢠MP3 Players
⢠External Hard Drives
⢠Scanners
⢠Entertainment Devices
⢠Printers
⢠Test and Measurement Systems
⢠POS Terminals
⢠Set Top Boxes
ï£ 2013 - 2016 Microchip Technology Inc.
DS00002142A-page 1
|
▷ |