MIC58P01_15 Datasheet, PDF (6/11 Pages) Micrel Semiconductor – 8-Bit Parallel-Input Protected Latched Driver

Micrel, Inc.
Timing
MIC58P01
Timing Conditions
(T_A = +25°C, Logic Levels are V_DD and Ground, V_DD = 5V)
A. Minimum data active time before strobe enabled (data set-up time) ........................................................................ 50ns
B. Minimum data active time after strobe disabled (data hold time) .............................................................................. 50ns
C. Minimum strobe pulse width ...................................................................................................................................... 125ns
D. Typical time between strobe activation and output on to off transition ..................................................................... 500ns
E. Typical time between strobe activation and output off to on transition...................................................................... 500ns
F. Minimum clear pulse width ........................................................................................................................................ 300ns
G. Minimum data pulse width ........................................................................................................................................ 225ns
June 5, 2015
6
Revision 2.0